Adsorption of Ammonia on Regenerable Carbon Sorbents
نویسندگان
چکیده
Results are presented on the development of reversible sorbents for the combined carbon dioxide, moisture, and trace-contaminant (TC) removal for use in Extravehicular Activities (EVAs), and more specifically in the Primary Life Support System (PLSS). The currently available life support systems use separate units for carbon dioxide, trace contaminants, and moisture control, and the long-term objective is to replace the above three modules with a single one. Data on sorption and desorption of ammonia, which is a major TC of concern, are presented in this paper. The current TC-control technology involves the use of a packed bed of acid-impregnated granular charcoal, which is non-regenerable, and the carbon-based sorbent under development in this project can be regenerated by exposure to vacuum at room temperature. In this study, several carbon sorbents were fabricated and tested for ammonia sorption. Ammonia-sorption capacity was related to carbon pore structure characteristics, and the temperature of oxidative carbon-surface treatment was optimized for enhanced ammonia-sorption performance.
منابع مشابه
Nitrogen enriched solid sorbents for CO2 capture
Reducing anthropogenic CO2 emissions to slow down the consequences of climate change concerns all developed countries. In the short term, one of the most viable options to cut down carbon emissions consists on CO2 capture and storage from large stationary sources such as power stations, cement plants, refineries, etc. The near-ready-to-use technology at this scale is amine scrubbing. However, i...
متن کاملA regenerable potassium and phosphate sorbent system to enhance dialysis efficacy and device portability: an in vitro study.
BACKGROUND Continuous dialysis could provide benefit by constant removal of potassium and phosphate. This study investigates the suitability of specific potassium and phosphate sorbents for incorporation in an extracorporeal device by capacity and regenerability testing. METHODS Capacity testing was performed in uraemic plasma. Regenerability was tested for potassium sorbents, with adsorption...
متن کاملInfluence of temperature and regeneration cycles on Hg capture and efficiency by structured Au/C regenerable sorbents.
The objective of this work is to evaluate a novel regenerable sorbent for mercury capture based on gold nanoparticles supported on a honeycomb structured carbon monolith. A new methodology for gold nanoparticles deposition onto carbon monolith support has been developed to obtain an Au sorbent based on the direct reduction of a gold salt onto the carbon material. For comparison purposes, colloi...
متن کاملA New Approach for Retaining Mercury in Energy Generation Processes: Regenerable Carbonaceous Sorbents
The energy production processes from fossil fuels represent the first anthropogenic source of mercury emissions in Europe and the second in the world. Among the different possibilities that can be posed to reduce these emissions, this work focuses on the use of regenerable sorbents based on gold nanoparticles dispersed on activated carbon foam. The use of regenerable sorbents would not only all...
متن کاملThe efficiency of modified powdered activated carbon for removal of ammonia nitrogen from aqueous solution: a process optimization using RSM (Response Surface Methodology), adsorption isotherm and kinetic study
The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...
متن کامل