Implementation of Input Shaping on Flexible Machines with Integer Controllers
نویسندگان
چکیده
This paper presents an input shaping method for building in real time a shaped velocity profile according to an integer algorithm that determines the command reference signal at each interpolation step. This integer implementation has the drawback of slightly reduce shaping robustness. However, experimental results confirm residual vibration reduction when robust shapers are used in the integer input shaping process. Copyright © 2002 IFAC.
منابع مشابه
Control of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملMicrocontroller-Based Input Shaping for Vibration Control of Flexible Manipulator System
This project presents investigations into the applications and performance of embedded input shaper in command shaping techniques for vibration control of a flexible manipulator. A constrained planar single-link flexible manipulator is considered and the dynamic model of the system is derived using the assume mode method. An unshaped bang-bang torque input is used to determine the characteristi...
متن کاملComparison of Input Shaping Teclhniques for Speed-Critical Multi-Mode Flexible Systems
To achieve the highest level performance with computer controlled machines, the flexibility of the system must be taken into account. Feedforward methods are often the most desirable means of eliminating vibration. The fastest motions can be obtained by using the timeoptimal flexible-body command. These commands depend on the system parameters, actuator limits, and the desired motion. Input sha...
متن کاملA Comparison of Input Shaping and Time-optimal Flexible-body Control
Input shaping is a method of reducing residual vibrations in computer-controlled machines. Shaped command profiles are generated by convolving a sequence of impulses, an input shaper, with the desired command signal. The shaped command profile will move the system without residual vibration. The performance of several types of input shapers is compared to the time-optimal flexible-body control ...
متن کاملExact Mixed Integer Programming for Integrated Scheduling and Process Planning in Flexible Environment
This paper presented a mixed integer programming for integrated scheduling and process planning. The presented process plan included some orders with precedence relations similar to Multiple Traveling Salesman Problem (MTSP), which was categorized as an NP-hard problem. These types of problems are also called advanced planning because of simultaneously determining the appropriate sequence and m...
متن کامل