Lecture 3b: Modeling of Rotational Mechanical Systems
نویسنده
چکیده
The objective of this lecture is to review the basic building blocks of lumped parameter rotational mechanical systems and to build the foundations that will enable you to model more complex dynamic systems consisting of translation and rotational elements. Corresponding to the translational elements mass, spring and damper, are the rotational inertia, rotational spring and rotational damper, respectively. We now discuss these elements briefly.
منابع مشابه
Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal
This paper investigates the effect of inserting a ring type barrier on leakage flow of brush seals with different bristles clearances (the distance between bristle pack tip and rotor surface). The ring is placed on both upstream and downstream sides of the bristles. An axisymmetric CFD model is employed to calculate radial pressure distribution along backing plate, axial pressure variation on r...
متن کاملAutomatic formulation of falling multiple flexible-link robotic manipulators using 3×3 rotational matrices
In this paper, the effect of normal impact on the mathematical modeling of flexible multiple links is investigated. The response of such a system can be fully determined by two distinct solution procedures. Highly nonlinear differential equations are exploited to model the falling phase of the system prior to normal impact; and algebraic equations are used to model the normal collision of this ...
متن کاملSimulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm
This paper proposes a Micro-electro-mechanical (MEMS) capacitive pressure sensor that relies on the movable electrode displaced like a flat plate equal to the maximum center deflection of diaphragm. The diaphragm, movable electrode and mechanical coupling are made of polysilicon, gold and Si3N4, respectively. The fixed electrode is gold and the substrate is Pyrex glass. This proposed method inc...
متن کاملEntropy generation analysis of non-newtonian fluid in rotational flow
The entropy generation analysis of non-Newtonian fluid in rotational flow between two concentric cylinders is examined when the outer cylinder is fixed and the inner cylinder is revolved with a constant angular speed. The viscosity of non-Newtonian fluid is considered at the same time interdependent on temperature and shear rate. The Nahme law and Carreau equation are used to modeling dependenc...
متن کاملMulti-objective Pareto optimization of bone drilling process using NSGA II algorithm
Bone drilling process is one the most common processes in orthopedic surgeries and bone breakages treatment. It is also very frequent in dentistry and bone sampling operations. Bone is a complex material and the machining process itself is sensitive so bone drilling is one of the most important, common and sensitive processes in Biomedical Engineering field. Orthopedic surgeries can be improved...
متن کامل