Glass Fibre Strength—A Review with Relation to Composite Recycling
نویسندگان
چکیده
The recovery and reuse of glass fibres from manufacturing waste and end-of-life composites in an environmentally-friendly, cost-effective manner is one of the most important challenges facing the thermosetting polymer composites industry. A number of processes for recycling fibres from such materials are available or under development. However, nearly all options deliver recycled glass fibres that are not cost-performance competitive due to the huge drop in strength of recycled glass fibre compared to its original state. A breakthrough in the regeneration of recycled glass fibre performance has the potential to totally transform the economics of recycling such composites. This paper reviews the available knowledge of the thermally-induced strength loss in glass fibres, discusses some of the phenomena that are potentially related and presents the status of research into processes to regenerate the strength and value of such weak recycled glass fibres.
منابع مشابه
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملFracture toughness, compressive strength and load-bearing capacity of short glass fibre-reinforced composite resin.
OBJECTIVE To investigate the reinforcing effect of short E-glass fibre fillers on fracture related mechanical properties of dental composite resin with a semi-interpenetrating polymer network (IPN) polymer matrix. METHODS Experimental short fibre composite (FC) resin was prepared by mixing 22.5 wt% of short E-glass fibres, 22.5 wt% of IPN-resin and 55 wt% of silane treated silica fillers usin...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کاملMicromechanical Parameters from Macromechanical Measurements on Glass Reinforced Polypropylene
In recent years many elegant techniques have been developed for the quantification of composite micromechanical parameters. Unfortunately most of these techniques have found little enthusiastic support in the industrial product development environment. We have developed an improved method for obtaining the micromechanical parameters, interfacial shear strength, fibre orientation factor, and fib...
متن کاملMechanical and Impact Properties of Untreated Jute Fabric Reinforced Polyester Laminates Compared with Different E- Glass Fibre Reinforced Laminates
In recent years, the improvement of properties of natural fibre reinforced laminates over the pure polymeric matrix has been thoroughly investigated with the aim of providing a possible replacement of E-glass fibre reinforced composites for some large-volume applications. In the present study, the properties of a jute/polyester laminate are compared with those yielded by two E-glass fibre woven...
متن کامل