Solid state precursor strategy for synthesizing hollow TiO2 boxes with a high percentage of reactive {001} facets exposed.

نویسندگان

  • Shuifen Xie
  • Xiguang Han
  • Qin Kuang
  • Jie Fu
  • Lei Zhang
  • Zhaoxiong Xie
  • Lansun Zheng
چکیده

Three-dimensional, hollow, anatase TiO(2) boxes, each was enclosed by six single-crystalline TiO(2) plates exposed with highly reactive {001} facets, were facilely obtained by calcining a cubic TiOF(2) solid precursor at 500-600 °C. The formation of such particular nanostructures is attributed to the hard self-template restriction and the adsorption of F(-) ions from the TiOF(2).

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hydrothermal etching fabrication of TiO2@graphene hollow structures: mutually independent exposed {001} and {101} facets nanocrystals and its synergistic photocaltalytic effects

Highly exposed facets TiO2 attracts enormous attention due to its excellent separation effect of photogenerated electron-hole pairs and induced high performance of photocatalytic activity. Herein, a novel hydrothermal etching reaction was used to synthesize graphene-wrapped TiO2 hollow core-shell structures. Different with the reported co-exposed facets TiO2 single crystal nanoparticles, the pr...

متن کامل

Anatase TiO2 crystals with exposed high-index facets.

Put your best face forward: The performance of TiO2 anatase crystals in energy and environmental applications is normally correlated with the TiO2 crystal facets exposed, and increasing the percentage of highly reactive surfaces is extremely important. A new gas-phase oxidation process using TiCl4 as precursor now yields anatase TiO2 single crystals with primarily high-index {105} facets, which...

متن کامل

Low-temperature synthesis of high-ordered anatase TiO2 nanotube array films coated with exposed {001} nanofacets

High-ordered anatase TiO2 nanotube array films coated with exposed high-reactive {001} nanofacets were fabricated by a modified hydrothermal method using amorphous anodic TiO2 nanotube arrays (ATONAs) as starting materials. It was found that the reaction between gas phase HF and solid ATONAs played a key role in the transformation process from amorphous to anatase TiO2, and the TiO2 tubular str...

متن کامل

Synthesis of nano-sized anatase TiO2 with reactive {001} facets using lamellar protonated titanate as precursor.

Nano-sized anatase TiO(2) with exposed {001} facets was synthesized from lamellar protonated titanate precursor. Owing to small size (ca. 11 nm) and high surface area (155 m(2) g(-1)), the crystals with 26.1% {001} facets exhibited markedly superior photoactivity to reference ca. 76 nm anatase TiO(2) nanosheets with 88.4% {001} facets.

متن کامل

CNTs threaded (001) exposed TiO2 with high activity in photocatalytic NO oxidation.

A microwave-ionothermal strategy was developed for in situ synthesis of CNTs threaded TiO2 single crystal with a tunable percentage of surface exposed (001) active facets. The CNTs were used as microwave antennas to create local "super hot" dots to induce Ti(3+) adsorption and hydrolysis, thereby leading to a good assembly of (001) facets exposed single crystalline TiO2 threaded by the CNTs in ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Chemical communications

دوره 47 23  شماره 

صفحات  -

تاریخ انتشار 2011