Application of Distribution Static Compensator (D-STATCOM) to Voltage Sag Mitigation
نویسندگان
چکیده
This paper presents a study of a D-STATCOM (Distribution Static Compensator) used for mitigating voltage sag. The basic idea of the voltage sag mitigation, using a D-STATCOM is to dynamically inject a current of desired amplitude, frequency and phase into the grid line. The proposed method extracts the active and reactive parts of the positiveand negative-sequence component for generating reference values of current that need to be injected into the point of connection D-STATCOM in order to compensate the voltage errors. The proposed method offers structural simplicity and less calculation complexity. Simulation results indicate that this method is effective and D-STATCOM has good performance to mitigate the voltage sag.
منابع مشابه
Fast Transient Hybrid Neuro Fuzzy Controller for STATCOM During Unbalanced Voltage Sags
A static synchronous compensator (STATCOM) is generally used to regulate voltage and improve transient stability in transmission and distribution networks. This is achieved by controlling reactive power exchange between STATCOM and the grid. Unbalanced sags are the most common type of voltage sags in distribution networks. A static synchronous compensator (STATCOM) is generally used to maintain...
متن کاملPSCAD Simulation Model of D-Statcom for Voltage Sag Improvement
This paper deals with the modeling and simulation of Distribution Static Compensator (D-STATCOM) for voltage sag mitigation. The D-STATCOM simulation model consists of 12-pulse inverter, which is connected in shunt with the system. A generalized sinusoidal pulse width modulation (SPWM) technique was developed in the proposed controller for fast control action of the D-STATCOM. Simulations of th...
متن کاملVoltage Sag Mitigation in Eight Bus System Using D-statcom for Power Quality Improvement
This work deals with modeling and simulation of multi bus system using D-STATCOM. Voltage sag is increased by connecting a heavy load. The sag is mitigated using D-STATCOM. The circuit models and simulation results are presented. The Simulation results are compared with the analytical results. KeywordsDistribution Static Synchronous Compensator (D-STATCOM)
متن کاملComparison of Push-Pull and Z-Source Inverter Based Statcom Systems
This paper presents the comparison of Push-Pull Inverter and Z-Source Inverter based Static Compensators (STATCOM).The closed loop system with STATCOM is modeled and simulated using the blocks of MATLAB/SIMULINK.Voltage sag mitigation using Push-Pull Inverter and ZSource Inverter are presented. The present work proposes Z-Source Inverter and Push-Pull Inverter based STATCOM for the control of r...
متن کاملA Comparison between SVC and STATCOM in Flicker Mitigation of Electric Arc Furnace using Practical Recorded Data
Electric arc furnace (EAF) is one of the largest loads in electric power systems. It is highly time varying and nonlinear. Its reactive power variations cause voltage fluctuations in nearby system which is known as flicker. On the other hand the nonlinear voltage-current characteristic causes strong voltage and current harmonics in EAF. To this end Flexible AC Transmission Systems (FACTS) techn...
متن کامل