Micro-Ramps for Hypersonic Flow Control
نویسندگان
چکیده
Shock/boundary layer interaction (SBLI) is an undesirable phenomenon, occurring in high-speed propulsion systems. The conventional method to manipulate and control SBLI is using a bleed system that involves the removal of a certain amount of mass of the inlet flow to control boundary layer separation. However, the system requires a larger nacelle to compensate the mass loss, larger nacelles contribute to additional weight and drag and reduce the overall performance. This study investigates a novel type of flow control device called micro-ramps, a part of the micro vortex generators (VGs) family that intends to replace the bleed technique. Micro-ramps produce pairs of counter-rotating streamwise vortices, which help to suppress SBLI and reduce the chances of flow separation. Experiments were done at Mach 5 with two micro-ramp models of different sizes. Schlieren photography, surface flow visualization and infrared thermography were used in this investigation. The results revealed the detailed flow characteristics of the micro-ramp, such as the primary and secondary vortices. This helps us to understand the overall flow physics of micro-ramps in hypersonic flow and their application for SBLI control.
منابع مشابه
Tvd Multigrid Solutions of Three-dimensional Viscous Hypersonic Flows
In the present paper a multigrid technique for three-dimensional perfect gas hypersonic vis-cous ows has been developed, employing a Total Variation Diminishing (TVD) discretization and an upwind correction prolongation, based on a monotonic reconstruction of coarse-grid correction. The methodology has good convergence properties, both for boundary layer ows and complex shock wave-boundary laye...
متن کاملMicro-Ramp Flow Control of Normal Shock/Boundary Layer Interactions
Boundary layer bleed has conventionally been used to control separation due to shock wave / boundary layer interactions (SBLIs) within supersonic engine inlets. However, bleed systems result in a loss of captured mass flow, incurring higher drag and ultimately lower propulsion system efficiency. Micro-ramp sub-boundary layer vortex generators (SBVGs) arranged in a spanwise array have been propo...
متن کاملAnalytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations
An approximate analytical solution is obtained for hypersonic flow past a slender elliptic cone using second-order perturbation techniques in spherical coordinate systems. The analysis is based on perturbations of hypersonic flow past a circular cone aligned with the free stream, the perturbations stemming from the small cross-section eccentricity. By means of hypersonic approximations for the ...
متن کاملNumerical Study of Non - Equilibrium Air Dissociation For Calculation of Electron Density in Hypersonic Flow
متن کامل
Laminar and Turbulent Aero Heating Predictions over Blunt Body in Hypersonic Flow
In the present work, an engineering method is developed to predict laminar and turbulent heating-rate solutions for blunt reentry spacecraft at hypersonic conditions. The calculation of aerodynamic heating around blunt bodies requires alternative solution of inviscid flow field around the hypersonic bodies. In this paper, the procedure is of an inverse nature, that is, a shock wave is assumed a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Micromachines
دوره 3 شماره
صفحات -
تاریخ انتشار 2012