A Monotonic Digitally Programmable Delay Element for Low Power VLSI Applications
نویسندگان
چکیده
Digitally programmable delay elements (DPDE) arerequired to be monotonic and low power. A lowpower digitally programmable delay element (DPDE) withmonotonic delay characteristics is proposed and a dynamiccurrent mirror together with a feedback technique enables acurrent-on-demand operation. The dynamic power is made proportional to the delay with a maximum of 25μW and static power is eliminated. DPDE is implemented with two new designs of CMOS digitally controlled oscillators(DCO).First design has been implemented withone driving strength controlled delay cell and with two NAND gates used as inverters. The second design with one delay cell and by two NOR gates is presented.
منابع مشابه
A digitally programmable delay element: design and analysis
Variable delay elements are often used to manipulate the rising or falling edges of the clock or any other signal in integrated circuits (ICs). Delay elements are also used in delay locked loops (DLLs). Although, a few types of digitally controlled delay elements have been proposed, an analytical expression for the delay of these circuits has not been reported. In this paper, we propose a new d...
متن کاملDesign and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملA Frequency Synthesis of All Digital Phase Locked Loop
All Digital Phase locked loops (ADPLL) plays a major role in System on Chips (SoC). Many EDA tools are used to design such complicated ADPLLs. It operates on two modes such as frequency acquisition mode and phase acquisition mode. Frequency acquisition mode is faster compared to Phase acquisition, hence frequency synthesis is performed. The CMOS technology is used to design such a complex desig...
متن کاملA Minimal-Cost Inherent-Feedback Approach for Low-Power MRF-Based Logic Gates
The Markov random field (MRF) theory has been accepted as a highly effective framework for designing noise-tolerant nanometer digital VLSI circuits. In MRF-based design, proper feedback lines are used to control noise and keep the circuits in their valid states. However, this methodology has encountered two major problems that have limited the application of highly noise immune MRF-based circui...
متن کاملA Low-Power Digitally Controlled Oscillator for All Digital Phase-Locked Loops
A low-power and low-jitter 12-bit CMOS digitally controlled oscillator (DCO) design is presented. The Low-Power CMOS DCO is designed based on the ring oscillator implemented with Schmitt trigger inverters. The proposed DCO circuit uses control codes of thermometer type to reduce jitters. Performance of the DCO is verified through a novel All Digital Phase-Locked Loop (ADPLL) designed with a uni...
متن کامل