Modelling Non-Invasive Ultrasonic Tomography for Industrial Liquid/Gas Flow Application
نویسندگان
چکیده
This paper presents modelling of non-invasive Ultrasonic Tomography via transmission-mode method for imaging liquid and gas flow. Transmission-mode approach has been used for sensing the liquid/gas two-phase flow, which is a kind of strongly inhomogeneous medium. The concept of observation time and the imaging technique for twophase flow using fan-shaped beam scanning geometry were presented.
منابع مشابه
Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems
Gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. They are widely used in various industrial applications such as oil extracting in petroleum industries. Gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, chur...
متن کاملDetermination of Water and Oil Flow Composition Using Ultrasonic Tomography
This paper presents an investigation into the application of an ultrasonic tomography system to determine the composition of water and oil flow. There are three modes of the ultrasonic tomography system, the transmission mode, reflection mode and the diffraction mode. In this research, the ultrasonic tomography system using the transmission mode was implemented. This method is also one of the n...
متن کاملThe Effects of Pressure Difference in Nozzle’s two Phase Flow on the Quality of Exhaust Mixture
In the most application of nozzle with gas-liquid two-phase flow, the quality of mixture in exhaust of nozzle is the most important parameter as well as the flow velocity. On the other hand, in some industrial application, such as water injection in forced induction (turbocharged or supercharged) internal combustion engine the spray quality is the main goal of designing. In this case and for im...
متن کاملAdvance Modelling and Simulation of Industrial Boilers
This paper presents some of the results of the simulation in the radiation section of an industrial boiler using an advanced mathematical model. Calculations are described for the flow, heat transfer, and chemical reaction processes occurring within a gas-fired cylindrical furnace. The calculation procedure is a two dimensional one in which the main hydrodynamic variables are the velocity and s...
متن کاملVoid Fraction Estimation by Using Electrical Capacitance Tomography and Differential Pressure in an Air-Water Co-Current Bubble Column
In process industries, the measurement of void fraction is considerably important for sustainable operations. The erroneous calculation of void fraction is inevitably be the cause of many industrial accidents such as loss of coolant accidents in reactor operations, sweet corrosions in sub-sea oil and gas pipelines and an in-efficient process control of chemical plants. Keeping in view the impor...
متن کامل