Mechanical annealing in the flow of supercooled metallic liquid
نویسندگان
چکیده
منابع مشابه
Atomic-scale structural evolution and stability of supercooled liquid of a Zr-based bulk metallic glass.
In this Letter, direct experimental evidence is provided for understanding the thermal stability with respect to crystallization in the Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5) glass-forming liquid. Through high-resolution transmission electron microscopy, the atomic-structure evolution in the glass-forming liquid during the isothermal annealing process is clearly revealed. In contrast with the e...
متن کاملShear-accelerated crystallization in a supercooled atomic liquid.
A bulk metallic glass forming alloy is subjected to shear flow in its supercooled state by compression of a short rod to produce a flat disk. The resulting material exhibits enhanced crystallization kinetics during isothermal annealing as reflected in the decrease of the crystallization time relative to the nondeformed case. The transition from quiescent to shear-accelerated crystallization is ...
متن کاملThe viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid
The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid was measured using parallel plate rheometry. The measurements were carried out with different heating rates between 0.0167 and 1.167 K/s as well as isothermally. Because of the high thermal stability above the glass transition of this bulk metallic glass former with respect to crystalli...
متن کاملAtom Probe Studies of Supercooled Liquids
Phase transformations in the supercooled liquid region (between T, and T,,,), prior to the onset of crystallization, in amorphous Pd-Ni-P alloys remain controversial. It has been previously proposed that the amorphous alloy decomposes into two amorphous phases prior to the crystallization reaction when annealed in the supercooled liquid region. Investigations by DSC, Mossbauer spectroscopy, X-r...
متن کاملEffect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کامل