Input Shaping Control of Container Crane Systems: Limiting the Transient Sway Angle
نویسندگان
چکیده
Chang-Do Huh and Keum-Shik Hong a Department of Mechanical and Intelligent Systems Engineering, Pusan National University, 30 Jangjeon-Dong, Kumjeong-Ku, Pusan, 609-735, Korea. Tel: +82-51-510-1481, Fax: +82-51-514-0685, Email: [email protected] b School of Mechanical Engineering, Pusan National University, 30 Jangjeon-Dong Kumjeong-Ku, Pusan 609-735, Korea. Tel: +82-51-510-2454, Fax: +82-51-514-0685 Email: [email protected]
منابع مشابه
Practical Sway Motion Control for Double Pendulum-type Overhead Crane System
The sway motion of crane can be successfully suppressed by properly shaping the reference command. Input shaping is a one type of feed-forward shaping method that is based on linear superposition. In this paper, we present the impact of double pendulum type overhead crane (DPTOC) system on the effectiveness of input shaping. An unshaped bang-bang input force is used to determine the characteris...
متن کاملSkew control of a quay container crane
In this paper, the skew control of the load (container) in the quay crane used in the dockside of a container terminal is investigated. The mathematical model of the 3-dimensional (3D) motions of the load is first derived. The container hooked to a spreader is suspended by four ropes in air. When the container is accelerated by the trolley or is disturbed by winds, it will make a rotational mot...
متن کاملSingle Input Fuzzy Controller with Command Shaping Schemes for Double-pendulum-type Overhead Crane
This paper presents investigations into the development of composite control schemes for trajectory tracking and antisway control of a double-pendulum-type overhead crane (DPTOC) system. A nonlinear DPTOC system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. The proposed method, known as the Single Input Fuzzy Logic Controller (SIFLC), reduces...
متن کاملHybrid Fuzzy Logic Control with Input Shaping for Input Tracking and Sway Suppression of a Gantry Crane System
Problem statement: Most of the common gantry crane results in a sway motion when transporting the load as fast as possible. In addition, precise cart position control of gantry crane must required a zero or near zero residual sway. Approach: In this study, the development of hybrid control schemes for input tracking and anti-sway control of a gantry crane system was investigated. To study the e...
متن کاملAn Input Shaping Controller Enabling Cranes to Move Without Sway
A gantry crane at the Savannah River Technology Center was retrofitted with an Input Shaping controller. The controller intercepts the operator’s pendant commands and modifies them in real time so that the crane is moved without residual sway in the suspended load. Mechanical components on the crane were modified to make the crane suitable for the anti-sway algorithm. This paper will describe t...
متن کامل