Simulation Analysis of Heat Transfer of Power Battery
نویسندگان
چکیده
Based on the model of battery temperature rising established, several kinds of temperature rising processes are analyzed by means of numerical simulation including heat dissipation by natural convection without fin or with fin and forced convection with fin. The comparison and analysis are made for temperature rising process about their temperatures of center and across section plane. It shows that from the results, with the increasing of discharging ratio, the temperature rising and temperature difference of power batter will increase obviously. It is effective to reduce temperature rising by means of forced air convection, but the temperature difference will still keep a big value and with a poor effect. Here it is proposed to decrease the temperature difference both with fin and forced air convection.
منابع مشابه
Thermodynamic simulation and pinch analysis of KCS11
In this study, a reputable Kalina cycle system, KCS 11, is simulated and analysed. Within this efficient cycle, there are three heat exchangers: the first heat exchanger is designated for heat absorption from the heat source, the second heat exchanger is designed for heat release to the cold source, and the third heat exchanger is designed for energy recovery. In order to achieve precise si...
متن کاملReview, analysis and simulation of different structures for hybrid electrical energy storages
Output power in a hybrid power system is constant while the input power with variable characteristics that is generated by different sources. Using Hybrid Electrical Energy Storage (HEES) systems, is growing rapidly since there is an obvious need for clean energy. This paper introduces different parts of a HEES system and then proposes HEES systems which employ battery, ultracapacitor and f...
متن کاملImplementation of Identical Spiral Square Inductive Coils for Wireless EV Battery Charging Application
In recent years, the popularity of wireless inductive power transfer (WIPT) system for electric vehicle battery charging (EVBC) is always ever-increasing. In the WIPT inductively coupled coil structure is the heart of the system and the mutual inductance (MI) between the coupled coils is the key factor for effective power transfer. This paper presents the analysis of mutual inductance between t...
متن کاملNumerical Simulation of Laminar Convective Heat Transfer and Pressure Drop of Water Based-Al2O3 Nanofluid as A Non Newtonian Fluid by Computational Fluid Dynamic (CFD)
The convective heat transfer and pressure drop of water based Al2O3 nanofluid in a horizontal tube subject to constant wall temperature condition is investigated by computational fluid dynamic (CFD) method. The Al2O3 nanofluid at five volume concentration of 0.1, 0.5, 1.0, 1.5 and 2 % are applied as a non Newtonian power law and Newtonian fluid with experimentally measured properties of density...
متن کاملCooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method
In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...
متن کاملComparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics
Steel pipes with circular cross-sections are usually used in cooling panels of electric arc furnaces. In the present study pipes with square cross-sections under equivalent conditions were used to obtain more information on the possibility of increasing the heat transfer and cooling efficiency. The results showed increased efficiency of the square pipe compared to the circular cross-section pip...
متن کامل