Review of the Thermo-Physical Properties and Performance Characteristics of a Refrigeration System Using Refrigerant-Based Nanofluids
نویسندگان
چکیده
Nanofluids are considered a promising choice for several heat transfer applications. With the increasing awareness for energy saving and efficiency improvement in various thermal systems, including refrigeration systems, there is a growing interest in the refrigerant-based nanofluids owing to their superior thermo-physical properties. Nanorefrigerants are a class of nanofluid, which consist of suspended nanoparticles in a base refrigerant. In this paper, it is intended to include many articles on refrigeration systems that use nanorefrigerants, published in the period from 2005 to 2015. Although this is an extensive review, it could not include all the papers, and only some major research works were selected. It is believed that the dependency of thermal conductivity and other properties on temperature will make the thermal systems more efficient while operating at a high temperature. The literature reviews associated with the performance characteristics of nanorefrigerants in refrigeration systems for the last 10 years have been compiled and presented in this paper. Furthermore, recent studies related to thermo-physical properties of nanorefrigerants and nanolubricants have also been summarized and reviewed in this paper.
منابع مشابه
Heat transfer enhancement in domestic refrigerator using R600a/mineral oil/nano-Al2O3 as working fluid
f liquid g gas ABSTRACT The experimental apparatus was build according to the national standards of India.. The performance of the refrigeration system depends upon the heat transfer capacity of the refrigerant. Normally R12, R22, R600, R600a and 134a are used as a refrigerant. This refrigerant heat transfer capacity is not so good and increase power consumption. Due to these limitation nanoflu...
متن کاملDynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle
A cold room assisted vapor-compression refrigeration cycle is dynamically modeled in a year and optimized. Total annual cost (TACO) and coefficient of performance (COP) are selected as two objective functions. Both cold room and refrigeration cycle parameters are considered as design variables. Moreover, three working fluids included R22, R134a and R407c are examined. The optimum Pareto front r...
متن کاملMethods for Improving Thermodynamic Performance of Vapour Compression Refrigeration System Using Twelve Eco Friendly Refrigerants in Primary Circuit And Nanofluid (Water- Nano Particles Based) in Secondary Circuit
This paper describes thermal modeling of Vapor Compression Refrigeration System using R134a in primary circuit and AL2O3-Water based nanofluids in secondary circuit. The model uses information of the secondary fluids input conditions geometric characteristics of the system, size of nanoparticles and the compressor speed to predict the secondary fluids output temperatures, the operating pressure...
متن کاملTesting of Environment Friendly Refrigerant R290 for Water Cooler Application (RESEARCH NOTE)
This paper presents environment friendly refrigerant R290 as a solution to the environmental concerns like depletion of ozone layer and rise in global warming because of wide use of synthetic refrigerants R22 and R134a. The water cooler is the widely used refrigeration application in warm climatic countries. Refrigerant R22 and R134a are predominantly used refrigerants in water cooler refrigera...
متن کاملSaving Energy by Exergetic Analysis of MTP Process Refrigeration System
The exergetic analysis is a tool that has been used successfully in many studies aiming a more rational energy consumption to reduce the cost of processes. With this analysis, it is possible to perform an evaluation of the overall process, locating and quantifying the degradation of exergy. This paper applies exergy approach for analyzing the heat exchanger network design and refrigeration of M...
متن کامل