Numerical Simulation of Laminar Separation-Bubble Control
نویسندگان
چکیده
In the present paper an active control mechanism for the control of laminar separation bubbles on airfoils is investigated by means of direct numerical simulation and linear stability theory. Boundary layer instabilities excited by periodic oscillations are utilized to control the size and length of the separation bubble and to make it finally disappear when desired. Unlike traditional vortex generators a sensor-actuator system based on this method will be adaptive to the respective flow conditions and will cause no additional undesired drag.
منابع مشابه
Numerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملInvestigation of 2d and 3d Boundary-layer Disturbances for Active Control of Laminar Separation Bubbles
In the present paper mechanisms exploiting hydrodynamic instability of a laminar baseflow in order to control the size of a separation bubble are investigated in detail by means of 2D and 3D direct numerical simulations (DNS). An actuator introduces low amplitude TollmienSchlichting like boundary-layer disturbances into the flow upstream of the bubble, which become amplified and trigger early l...
متن کاملActive Control of a Laminar Separation Bubble
In the present paper an active control mechanism for the control of laminar separation bubbles on airfoils is investigated by means of direct numerical simulation and linear stability theory. Boundary layer instabilities excited by periodic oscillations are utilized to control the size and length of the separation bubble and to make it finally disappear when desired. Unlike traditional vortex g...
متن کاملDirect Numerical Simulation of Non-Linear Transitional Stages in an Experimentally Investigated Laminar Separation Bubble
This paper details a joint numerical and experimental effort to investigate a transition process in a laminar separation bubble, with the emphasis being put on the numerical contribution. A laminar separation bubble is formed if a laminar boundary layer separates in a region of adverse pressure gradient on a flat plate and undergoes transition, leading to a reattached turbulent boundary layer. ...
متن کاملDNS of a Laminar Separation Bubble
Direct numerical simulation (DNS) is used to study the evolution of a boundary layer that was laminar initially followed by separation and then reattachment owing to generation of turbulence. This creates a closed region of recirculation, known as the laminar-separation bubble. The present simulation emulates the flow environment encountered in a modern LP turbine blade, where a laminar separat...
متن کامل