Characterization of Emissions from Thermally Modified Wood and Their Reduction by Chemical Treatment
نویسندگان
چکیده
Thermal treatment is a suitable method for improving the quality of wood types like spruce, beech, or poplar, and thus to open up new fields of application that used to be limited to tropical woods or woods treated with timber preservatives. These thermally treated woods are characterized by a typical odor caused by degradation products of miscellaneous wood components. The characterization and removal of those odorous substances were investigated using chromatographic and spectroscopic methods. Headspace gas chromatography (GC) in combination with solid-phase microextraction (SPME) was used for a qualitative analysis of volatile wood emissions, and the detectable volatiles were compared before and after solvent extraction. Wood solvent extractives were investigated by means of gas chromatography/mass spectrometry and then evaluated in terms of changes in composition caused by the thermal treatment process.
منابع مشابه
Performance Characterization of Coatings on Treated-wood
Coating performance is greatly influenced by the properties of the wood substrate. This study was focused on evaluating the performance of coatings on both preservative- and thermally-treated wood. A number of commercially formulated semi-transparent stains Alkyd, Alkyd-Acrylic and PU were applied on four different types of preservative treated and heat-treated wood and their performances were ...
متن کاملThermal and chemical modification of bentonite for adsorption of an anionic dye
Raw bentonite (RB), a known low-cost versatile clay was used as an adsorbent. RB was treated thermally and chemically to increase its adsorption capacity. For thermal treatment (TTB), the bentonite was heated at 400 °C for 60 min, and for the chemical modification, its surface was treated by cetyltrimethylammonium bromide (CTAB) to prepare organo-modified bentonite (CTAB-B). The removal of Cong...
متن کاملAn Investigation of Wood-Plastic Novolac Modified by Biomass Pyrolysis Oils
The possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of Wood-Plastic novolac has been proved by using Differential Scanning Calorimetry (DSC) and Fourier Transformed Infra Red (FT-IR) spectroscopy. Synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. It was found that mechanical p...
متن کاملPreparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method
Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...
متن کاملIranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation
In the present work, Iranian natural zeolite particles (NZ) as an abundant and low-cost resource were modified by chemical covalent attachments of commercially available stearic acid (SA) with tunable hydrophobic/hydrophilic properties. The versatile, simple, and green technique of mechanogriding was performed for the hydrophobic derivatisation of NZ. The NZ and as-prepared modified particles w...
متن کامل