High-resolution photometric optical monitoring for thin-film deposition.

نویسندگان

  • Rabi Rabady
  • Kirill Zinoviev
  • Ivan Avrutsky
چکیده

Real-time monitoring of thin-film deposition with high resolution is important for precise fabrication of thin-film devices in a technological environment with ever-increasing demands for smaller size and better performance. Using photometry, we were able to achieve a real-time optical monitoring resolution of film thickness that is comparable with a single atomic layer scale (i.e., subnanometer). Filtering noise efficiently and compensating for sources of error by use of an appropriate model produced this high resolution. The procedure proved reliable and can be useful in the thin-film-deposition industry.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Growth, Characterization of Cu Nanoparticles Thin Film by Nd: YAG Laser Pulses Deposition

We report the growth and characterization of Cu nanoparticles thin film of on glass substrate by pulse laser deposition method. The Cu thin film prepared with different energy 50, 60, 70, and 80 mJ. The energy effect on the morphological, structural and optical properties were studied by AFM, XRD and UV-Visible spectrophotometer. Surface topography studied by atomic force microscopy revealed na...

متن کامل

Simulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition

The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...

متن کامل

Evaporated HfO2/SiO2 Optical Coatings and Modifications for High-Power Laser Applications

Evaporated optical coatings fabricated from hafnium dioxide and silicon dioxide are the standard approach for high-peak-power laser components due to the high laser damage resistance of such coatings and the ability to deposit on largeaperture substrates. The tensile film stresses of such coatings may lead to failure, however, particularly in low-relative-humidity purged or vacuum use environme...

متن کامل

Preparation of Nanocrystalline CdS Thin Films by a New Chemical Bath Deposition Route for Application in Solar Cells as Antireflection Coatings

Nanocrystalline cadmium sulfide thin films as antireflection materials for solar cells have been prepared by a new chemical solution deposition route in an aqueous medium at 50 °C. as-deposited thin films were studied using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and optical absorption spectra. X-ray diffraction data indicated the formation of hexagonal na...

متن کامل

Band-Gap Tuning Of Electron Beam Evaporated Cds Thin Films

The effect of evaporation rate on structural, morphological and optical properties of electron beam evaporated CdS thin films have been investigated. CdS thin film deposited by electron beam evaporation method in 12nm/min and 60nm/min evaporation rates on glass substrates. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and Atomic Force Microscopy were used to character...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied optics

دوره 43 1  شماره 

صفحات  -

تاریخ انتشار 2004