Dual-band step-impedance bandpass filter for multimode wireless LANs - Electronics Letters
نویسندگان
چکیده
A step-impedance bandpass filter is presented for multimode wireless LANs. The filter has a new dual-band feature of two tunable passbands at desired frequencies and high out-of-band suppression, generated by incorporating step-impedance resonators in a comb-filter topology. It saves more than half the circuit size compared with the switch-type dual-band topology. The simulation and measurement results show the dual-band feature of two passbands at 2.45 and 5.75 GHz with 85 dB suppression at 3.5 GHz.
منابع مشابه
A Simple Asymmetrical Step-Impedance Resonator Dual-Band Bandpass Filter
Designing of dual-band bandpass filters has become wide spreading to support wireless communication system standards including WLANs [1-6]. Although they have presented new structures for reducing size by using a quarter wavelength structure in [1-3], meandered resonator to increase coupling value for high selectivity [4-5], and interdigital capacitors between resonators for high selectivity, t...
متن کاملA Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band
A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...
متن کاملCompact Dual-Band Bandpass Filter Based on Quarter Wavelength Stepped Impedance Resonators
This paper presents a compact dual-band bandpass filter that involves using the quarter wavelength stepped impedance resonators (SIRs) for achieving simultaneously compact circuit size and good dual-band performance. The filter is designed at 2.4 / 3.5 GHz and constructed by two pairs of quarter wavelength SIRs and source-load lines. By properly tuning the impedance ratio, length ratio and radi...
متن کاملMicrowave Dual-Band Bandpass Filter using L-shaped Stepped Impedance Resonators
This work demonstrates a microwave dual band bandpass filter using two L–shaped stepped impedance resonators (SIRs) and a coupled feed structure. The coupled feed structure can be a single sided or a double sided structure. Two sets of physical parameters are used to control the coupling coefficient and external quality factor. Thus, the specification, such as the central frequencies and the ba...
متن کاملFractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کامل