Hydrogel core flexible matrix composite (H-FMC) actuators: theory and preliminary modelling
نویسندگان
چکیده
The underlying theory of a new actuator concept based on hydrogel core flexible matrix composites (H-FMC) is presented. The key principle that underlines the H-FMC actuator operation is that the three-dimensional swelling of a hydrogel is partially constrained in order to improve the amount of useful work done. The partial constraint is applied to the hydrogel by a flexible matrix composite (FMC) that minimizes the hydrogelʼs volume expansion while swelling. This constraint serves to maximize the fixed charge density and resulting osmotic pressure, the driving force behind actuation. In addition, for certain FMC fibre orientations the Poissonʼs ratio of the anisotropic FMC laminate converts previously unused hydrogel swelling in the radial and circumferential directions into useful axial strains. The potential benefit of the HFMC concept to hydrogel actuator performance is shown through comparison of force–stroke curves and evaluation of improvements in useful actuation work. The model used to achieve this couples chemical and electrical components, represented with the Nernst–Plank and Poisson equations, as well as a linear elastic mechanical material model, encompassing limited geometric nonlinearities. It is found that improvements in useful actuation work in the order of 1500% over bare hydrogel performance are achieved by the H-FMC concept. A parametric study is also undertaken to determine the effect of various FMC design parameters on actuator free strain and blocking stress. A comparison to other actuator concepts is also included.
منابع مشابه
High-performance Flexible Matrix Composite Actuators for Trailing Edge Flap Control
Novel smart material and actuator technology will ultimately lead to the development of aerodynamically efficient air vehicles capable of radical shape change that can accomplish various mission types with superior performance. In this research, active skins based upon pressurized flexible matrix composites (FMCs) are investigated for trailing edge flap control of a glider wing. The new active ...
متن کاملModified L1 Adaptive Control Design for Satellite FMC Systems with Actuators Time Delay
A modified method for satellite attitude control system in presence of novel actuators is proposed in this paper. The attitude control system is composed of three fluidic momentum controller (FMC) actuators that are used to control Euler angles and their dynamics is considered in satellite attitude equations as well. L1 adaptive control is utilized for satellite three-axial ...
متن کاملComposite Films Based on Aligned Carbon Nanotube Arrays and a Poly(N-Isopropyl Acrylamide) Hydrogel
Hybrid materials based on carbon nanotubes (CNTs) and polymers, which integrate the unique characters and functions of these two types of components, have shown improved properties and potential applications in many fields. However, the aggregation of CNTs in the polymer matrix is always a big problem in the preparation of composites. It has been proven that using CNT arrays instead of random C...
متن کاملNonlinear Analysis of a Flexible Beam Actuated by a Couple of Active SMA Wire Actuators
There are two different ways of using SMA wires as actuators for shape control of flexible structures; which can be either embedded within the composite laminate or externally attached to the structure. Since the actuator can be placed at different offset distances from the beam, external actuators produce more bending moment and, consequently, considerable shape changes with the same magnitude...
متن کاملHigher-Order Stability Analysis of Imperfect Laminated Piezo-Composite Plates on Elastic Foundations Under Electro-Thermo-Mechanical Loads
This article provides a fully analytical approach for nonlinear equilibrium path of rectangular sandwich plates. The core of structure is made of symmetric cross-ply laminated composite and the outer surfaces are piezoelectric actuators which perfectly bonded to inner core. The structure is subjected to electro-thermo-mechanical loads simultaneously. One side of plate is rested on Pasternak typ...
متن کامل