Simplified I-V Characteristic Tester for Photovoltaic Modules Using a DC-DC Boost Converter
نویسندگان
چکیده
In this paper, an efficient testing system for measuring a PV module’s I-V curve is proposed. The proposed system is based on a controlled DC-DC boost converter. The advantage of using a DC-DC converter is that this converter is typically used in PV systems to track the maximum power point and to control the charging of the battery. Consequently, this device is utilized for I-V curve extraction without the need for further external devices. The I-V curve is extracted by modifying the duty cycle of the triggering signal of the boost converter’s switch. The proposed system has been tested experimentally using a 120 Wp PV module. The results show that the proposed system can successfully extract I-V curves of PV module. Notably, the performance of the tested module, as measured by this study’s system as well as with a reference system, was found to be in the range of 61–67% of the performance given in the datasheet. Hence, this result highlights the importance of considering a measurement of the actual performance of PV modules when designing any PV system so as to avoid an undersized system. The proposed I-V testing system can be used as a simple tool to diagnose any shortages or low performance problems in PV system.
منابع مشابه
A DER Based Single - Phase Asymmetrical 27 Level Inverter Topology
This paper deals single phase 27-level multilevel inverter topology for DER’s-based DC/AC conversion system. This work mainly focuses on cascaded MLI using three unequal dc sources in order to produce twenty seven-level output. In this study, a high step-up converter is introduced as a front-end stage to improve the conversion efficiency of conventional boost converters and to stabilize the out...
متن کاملThe New Modeling for MPPT Control of Photovoltaic Cellules
Consideration of the Current-voltage (I-V) characteristics variations of solar modules with temperature and irradiations variations is basic for maximum power point tracking (MPPT). Having a simple and accurate mathematical model for the optimize utilization of the solar modules is essential. In this paper, a novel modeling of photovoltaic systems with novel coefficients is proposed for mathema...
متن کاملThe New Modeling for MPPT Control of Photovoltaic Cellules
Consideration of the Current-voltage (I-V) characteristics variations of solar modules with temperature and irradiations variations is basic for maximum power point tracking (MPPT). Having a simple and accurate mathematical model for the optimize utilization of the solar modules is essential. In this paper, a novel modeling of photovoltaic systems with novel coefficients is proposed for mathema...
متن کاملDesign of Maximum Power Point Tracking in Solar Array Systems Using Fuzzy Controllers
In recent year's renewable energy sources have become a useful alternative for the power generation. The power of photovoltaic is nonlinear function of its voltage and current. It is necessary to maintain the operation point of photovoltaic in order to get the maximum power point (MPP) in various solar intensity. Fuzzy logic controller has advantage in handling non-linear system. Maximum power ...
متن کاملA Soft Switched DC-DC Boost Converter for Use in Grid Connected Inverters
This paper presents a soft-switching DC-DC boost converter, which can be utilized in renewable energy systems such as photovoltaic array, and wind turbine connections to infinite bus of a big power network, using grid connected inverters. In the proposed topology for the DC-DC boost converter, the main and the auxiliary power switches are turned on and turned off with zero voltage switching (ZV...
متن کامل