Response Surface Methodology Study on Magnetite Nanoparticle Formation under Hydrothermal Conditions
نویسندگان
چکیده
In a hydrothermal preparation of crystalline magnetite (Fe3O4) nanoparticles, the influence of the experimental parameters (initial molar ratio of ferrous/ferric ions, initial concentration of ferrous ions, and heating time), and their interactions, on the particle formation was studied using response surface methodology (RSM), based on a statistical design of experiments (DOE). As indices indicating particle formation and crystallization, the variation in the particle diameter and crystallite size with the synthesis conditions was examined. The crystallite size was greatly affected by both the initial ferrous/ ferric ion molar ratio and the heating time, whereas the particle diameter strongly depended on the heating time, and on the interaction between the initial ferrous/ferric ion molar ratio and the initial concentration of ferrous ions. The results from a statistical analysis suggest that the polycrystalline Fe3O4 nanoparticles form via crystal growth and/or thermal aggregation, after nucleation during hydrothermal treatment.
منابع مشابه
Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology
In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...
متن کاملHydrothermal synthesis of surface-modified copper oxide-doped zinc oxide nanoparticles for degradation of acid black 1: Modeling and optimization by response surface methodology
Dyes are widely used in various industries most of them are not readily biodegradable and are consisted of number of toxic, mutagenic, and carcinogenic compounds. Therefore, it is essential to remove them from effluent before their discharge to the environment. The objective of this investigation was to synthesize copper oxide (CuO) doped zinc oxide (ZnO) nanoparticles under mild hydrothermal c...
متن کاملRemoval of Diazinon from Aqueous Solutions in Batch Systems Using Cu-modified Sodalite zeolite: An Application of Response Surface Methodology
In this work, perlite was used as a low-cost source of Si and Al in the synthesis of sodalite zeolite using hydrothermal synthesis method. Cu2O nanoparticles were coated on a bed of sodalite zeolite and used as an adsorbent for removal of diazinon from aqueous solutions. To analyze the process, a significant variable .i.e. removal efficiency (%) of diazinon and three dependent parameters as the...
متن کاملAlkaline Metal Reagent-Assisted Synthesis of Monodisperse Iron Oxide Nanostructures
The solvothermal decomposition of iron complexes using the heat-up process enables monodisperse Fe3O4 nanoparticle synthesis. Here, we demonstrate that the high reduction potential capability of alkaline metal reagents in the reductive environment allows for pure magnetite phase formation at 200 ◦C, which is lower than that of typical synthetic method and offers highly crystalline superparamagn...
متن کاملHydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology
A hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (RSM). The synthesized zirconia samples were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM) analyses to identify mean nano...
متن کامل