1 Ω–10 kΩ high accuracy standard setup for calibration of multifunction electrical instruments
نویسندگان
چکیده
A temperature controlled 1 Ω and 10 kΩ standard resistors setup has been developed at National Institute of Metrological Research, (INRIM), to transfer the traceability to high accuracy multifunction electrical instruments used in Secondary calibration laboratories. These two standards are formed respectively by ten in parallel connected 10 Ω and 100 kΩ resistors inserted into a temperature controlled aluminium box. In addition,the 10 Ω resistors are put in separate place from the 100 kΩ resistors and in oil bath. Preliminary results of short time stability (2h) were about few parts of 10.
منابع مشابه
1 Ω – 10 k Ω High Precision Resistance Setup to calibrate Multifunction Electrical instruments
A temperature controlled 1 Ω–10 kΩ Standard resistors setup was developed at National Institute of Metrological Research, (INRIM). The aim of this realization was the involvement of the setup resistors in the traceability transfer process to high accuracy multifunction electrical instruments used in Secondary Electrical Calibration Laboratories or even their use as primary Standards in high lev...
متن کامل1 – 10 k high Precision transportable Setup to calibrate Multifunction Electrical instruments
A temperature controlled 1 –10 kΩ standard Resistors transportable setup was developed at National Institute of Metrological Research, (INRIM) for the calibration and adjustment of multifunction electrical instruments. The two Standards consist respectively of two 10 and 100 k parallel connected resistors nets inserted in a temperature controlled aluminium box. Novelty of the realization is...
متن کاملHigh level measurement comparison on a high performance multifunction calibrator between THE INRIM-Lab for multifunction instruments calibration and an Accredited Electrical Calibration Laboratory
R sumé. Cet article présente une comparaison de mesures entre le laboratoire pour l'étalonnage des instruments électriques multifonctions de l’Institut national de métrologie de recherche (INRIM) et un laboratoire d'étalonnage électrique de haut niveau. L'instrument à étalonner utilisé est un calibrateur multifonction de haute performance qui a été choisi pour l'amplitude de ses champs de mesur...
متن کاملEstimation and Calibration of Robot Link Parameters with Intelligent Techniques
Abstract: Using robot manipulators for high accuracy applications require precise value of the kinematics parameters. Since measurement of kinematics parameters are usually associated with errors and accurate measurement of them is an expensive task, automatic calibration of robot link parameters makes the task of kinematics parameters determination much easier. In this paper a simple and easy ...
متن کاملSuppression of Systematic Errors of Electronic Distance Meters for Measurement of Short Distances
In modern industrial geodesy, high demands are placed on the final accuracy, with expectations currently falling below 1 mm. The measurement methodology and surveying instruments used have to be adjusted to meet these stringent requirements, especially the total stations as the most often used instruments. A standard deviation of the measured distance is the accuracy parameter, commonly between...
متن کامل