Evaporation of droplets on strongly hydrophobic substrates.
نویسندگان
چکیده
The manner in which the extreme modes of droplet evaporation (namely, the constant contact radius and the constant contact angle modes) become indistinguishable on strongly hydrophobic substrates is described. Simple asymptotic expressions are obtained which provide good approximations to the evolutions of the contact radius, the contact angle, and the volume of droplets evaporating in the extreme modes for a wide range of hydrophobic substrates. As a consequence, on strongly hydrophobic substrates it is appropriate to use the so-called "2/3 power law" to extrapolate the lifetimes of droplets evaporating in the constant contact radius mode as well as in the constant contact angle mode.
منابع مشابه
Evaporation of picoliter droplets on surfaces with a range of wettabilities and thermal conductivities.
The evaporation of picoliter water and ethanol droplets generated by drop-on-demand inkjet printing was investigated on substrates with apparent contact angles between 10^{∘} and 135^{∘} and thermal conductivities between 0.25 and 149 Wm^{-1}K^{-1}. Drying times were calculated from a diffusion-limited model for droplets with both pinned and moving contact lines as a function of droplet diamete...
متن کاملDroplet evaporation on heated hydrophobic and superhydrophobic surfaces.
The evaporation characteristics of sessile water droplets on smooth hydrophobic and structured superhydrophobic heated surfaces are experimentally investigated. Droplets placed on the hierarchical superhydrophobic surface subtend a very high contact angle (∼160°) and demonstrate low roll-off angle (∼1°), while the hydrophobic substrate supports corresponding values of 120° and ∼10°. The substra...
متن کاملAssessment of water droplet evaporation mechanisms on hydrophobic and superhydrophobic substrates.
Evaporation rates are predicted and important transport mechanisms identified for evaporation of water droplets on hydrophobic (contact angle ~110°) and superhydrophobic (contact angle ~160°) substrates. Analytical models for droplet evaporation in the literature are usually simplified to include only vapor diffusion in the gas domain, and the system is assumed to be isothermal. In the comprehe...
متن کاملBuoyancy-induced on-the-spot mixing in droplets evaporating on nonwetting surfaces.
We investigate hitherto-unexplored flow characteristics inside a sessile droplet evaporating on heated hydrophobic and superhydrophobic surfaces and propose the use of evaporation-induced flow as a means to promote efficient "on-the-spot" mixing in microliter-sized droplets. Evaporative cooling at the droplet interface establishes a temperature gradient that induces buoyancy-driven convection i...
متن کاملDepinning of 2 d and 3 d droplets blocked by a hydrophobic defect
On non-ideal real substrates the onset of droplet motion under lateral driving is strongly influenced by substrate defects. A finite driving force is necessary to overcome the pinning influence of microscale heterogeneities. The dynamics of depinning twoand three-dimensional droplets is studied using a long-wave evolution equation for the film thickness profile in the case of a localized hydrop...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 31 12 شماره
صفحات -
تاریخ انتشار 2015