Rate dependent finite strain constitutive model of polyurea
نویسندگان
چکیده
Article history: Received 7 October 2009 Received in final revised form 7 October 2010 Available online 16 October 2010
منابع مشابه
Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملFinite Strain Behavior of Polyurea for a Wide Range of Strain Rates
Polyurea is a special type of elastomer that features fast setting time as well as good chemical and fire resistance. It has also good mechanical properties such as its high toughness-to-density ratio and high strain rate-sensitivity, so its application is recently extended to structural purpose to form sandwich-type or multi-layered plates. Those structures can be used for retrofitting of mili...
متن کاملAn experimentally-based viscoelastic constitutive model for polyurea, including pressure and temperature effects
Presented here are the results of a systematic study of the viscoelastic properties of polyurea over broad ranges of strain rates and temperatures, including the high-pressure effects on the material response. Based on a set of experiments and a master curve developed by Knauss (W.G. Knauss, Viscoelastic Material Characterization relative to Constitutive and Failure Response of an Elastomer, In...
متن کاملA New Approach for Stress State - Dependent Flow Localization Failure Bounded Through Ductile Damage in Dynamically Loaded Sheets
In this paper, a new approach is proposed for stress state - dependent flow localization in bifurcation failure model bounded through ductile damage in dynamically loaded sheets. Onset of localized necking is considered in phenomenological way for different strain rates to draw the forming limit diagram (FLD). Using a strain metal hardening exponent in the Vertex theory related to the strain ra...
متن کاملNumerical modeling of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments
0167-6636/$ see front matter 2009 Elsevier Ltd doi:10.1016/j.mechmat.2009.09.009 * Corresponding author. Address: University of Ca Mechanical and Aerospace Engineering, 4909 Eng 9500 Gilman Drive, La Jolla, CA 92093-0416, USA. T E-mail address: [email protected] (S. Nemat-Nasser). Results of computationalmodeling and simulation of the response ofmonolithicDH-36 steel plates and bilayer steel-polyure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011