Determination of inorganic elements in poppy straw by scanning electron microscopy with energy dispersive spectrometry as a means of ascertaining origin.

نویسندگان

  • E Copur
  • N G Göger
  • T Orbey
  • B Sener
چکیده

Cultivation of poppy as a source of opium alkaloids for legitimate medical purposes has a long tradition in Turkey. The main products are poppy straw and concentrate of poppy straw, obtained from dried poppy capsules. The aims of the study reported in the present article were to establish inorganic element profiles for the poppy-growing provinces of Turkey by means of x-ray analysis by scanning electron microscopy with energy dispersive spectrometry (SEM/EDS) and to explore the potential of the technique for determination of origin. Ten elements (sodium, magnesium, silicon, phosphorus, sulphur, chlorine, potassium, calcium, copper and zinc) were analysed in poppy straw samples from 67 towns in nine provinces. As regards the determination of origin, the most significant finding was the presence of copper and zinc in the poppy straw samples from 8 of the 15 towns in Afyon Province. Since those elements are not normally found in soil, it is assumed that their presence is the result of environmental (industrial) contamination. Differences in the samples from the other eight provinces were less significant, possibly a result of their geographical proximity. Nevertheless, differences in the samples were apparent. Because the findings are relative rather than absolute in terms of presence or absence of individual inorganic elements, further research is required to convert them into operationally usable results. The inorganic element profiles generated in the study have been used to form the basis for the development of a comprehensive database on poppy straw samples, which may be used in comparing samples and determining their origin.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Inorganic Sensitized Solar Cells by Drop Casting Deposition of PbSe and PbTe on the TiO2 Surface

In this work, PbSe and PbTe sensitized TiO2 solar cells were fabricated. PbSe and PbTe nanostructure was deposited on the TiO2 surface via a drop cast method. The fabricated surfaces were examined by atomic force microscopy (AFM). Also the optical properties of the layers were studied by diffuse reflectance spectroscopy (DRS) spectra. The morphology of the surfaces was obtained by scanning elec...

متن کامل

Significance of Chemical Decomposition of Chloroethyl Phenyl Sulfide (CEPS) using Zinc-Cadmium Oxide (ZnO-CdO) Nanocomposite

The zinc-cadmium oxide (ZnO-CdO) nanocomposites with different weight percentages of cadmium oxide (CdO) nanoparticles were successfully synthesized by the sonochemical method using zinc and cadmium nitrates as precursors to probe their nano-structured surfaces for the decomposition reactions of chloroethyl phenyl sulfide (CEPS) as a surrogate of sulfur mustard agent simulant. Scanning electron...

متن کامل

Significance of Chemical Decomposition of Chloroethyl Phenyl Sulfide (CEPS) using Zinc-Cadmium Oxide (ZnO-CdO) Nanocomposite

The zinc-cadmium oxide (ZnO-CdO) nanocomposites with different weight percentages of cadmium oxide (CdO) nanoparticles were successfully synthesized by the sonochemical method using zinc and cadmium nitrates as precursors to probe their nano-structured surfaces for the decomposition reactions of chloroethyl phenyl sulfide (CEPS) as a surrogate of sulfur mustard agent simulant. Scanning electron...

متن کامل

Photocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

متن کامل

Photocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Bulletin on narcotics

دوره 57 1-2  شماره 

صفحات  -

تاریخ انتشار 2005