Statistical Process Capability Design to Improve Process Stability of a Molding Machine
ثبت نشده
چکیده
Justification of production and manufacturing processes overtime, process capability in the concept of statistical control has been of great importance because it has promoted the production of products that satisfy the expectation of consumers. This paper aimed at promoting the adoption of quality process capability design in a bid to improve the process stability of a process and improve the process performance in the long run of production. In ensuring this, the technique of design of experiment is adopted using factorial design after which the capability analysis was carried out on the data on plastic containers produced by molding machines as deduced from the control X-bar and Range charts, it was established that the process was observed to be stable and in a state of statistical quality control and the plastic containers produced were observed to differ from one another as a result of variation on the part of the operators of the molding machines. Citation: Joseph KA (2017) Statistical Process Capability Design to Improve Process Stability of a Molding Machine. J Appl Computat Math 6: 340. doi: 10.4172/2168-9679.1000340
منابع مشابه
Process Capability Studies in an Automated Flexible Assembly Process: A Case Study in an Automotive Industry
Statistical Process Control (SPC) methods can significantly increase organizational efficiency if appropriately used. The primary goal of process capability studies is to obtain critical information about processes to render them even more effective. This paper proposes a comprehensive framework for proper implementation of SPC studies, including the design of the sampling procedure and interva...
متن کاملExperimental and Numerical Investigation of Thickness on the Shrinkage and out of Roundness in Cylindrical Parts in Injection Molding Process
Injection molding process is one of the most important methods of forming in the plastics manufacturing industry. Shrinkage and out of roundness are phenomenons that affect the final product quality. In this study, the effect of the thickness of cylindrical parts from polypropylene material on shrinkage and out of roundness has been investigated. For this purpose, injection molding process is s...
متن کاملA New Robust Control Design Based on Feedback Compensator for Sssc
In this paper, the modified linearized Phillips-Heffron model is utilized to theoretically analyze asingle-machine infinite-bus (SMIB) installed with SSSC. Then, the results of this analysis are used forassessing the potential of an SSSC supplementary controller to improve the dynamic stability of apower system. This is carried out by measuring the electromechanical controllability through sing...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملA New Fuzzy Stabilizer Based on Online Learning Algorithm for Damping of Low-Frequency Oscillations
A multi objective Honey Bee Mating Optimization (HBMO) designed by online learning mechanism is proposed in this paper to optimize the double Fuzzy-Lead-Lag (FLL) stabilizer parameters in order to improve low-frequency oscillations in a multi machine power system. The proposed double FLL stabilizer consists of a low pass filter and two fuzzy logic controllers whose parameters can be set by the ...
متن کامل