A High-power L-band Rf Window*
نویسندگان
چکیده
This paper discusses the design, fabrication and testing of a high power alumina disk window in WR1500 waveguide at L Band, suitable for use in the NLC damping ring RF cavities at 714 MHz and the LEDA Accelerator at 700 MHz. The design is based on the fabrication methods used for the successful PEP-II cavity windows. Four prototype windows at 700 MHz have been produced by LBNL for testing at LANL. The RF design and simulation using MAFIA, laboratory cold test measurements, fabrication methods and preliminary high power test results are discussed.
منابع مشابه
High Power X-band Semiconductor Rf Switch for Pulse Compression Systems of Future Linear Colliders
We describe the potential of semiconductor X-band RF switch arrays as a means of developing high power RF pulse compression systems for future linear colliders. We describe design methodology of high power RF switches, and scaling law which governs the relation between power handling capability and number of elements. The design and implementation of the active waveguide window is presented. Th...
متن کاملDevelopment of High Power X-Band Semiconductor RF Switch for Pulse Compression Systems of Future Linear Colliders
We describe development of semiconductor X-band high-power RF switches. The target applications are high-power RF pulse compression systems for future linear colliders. We describe the design methodology of the architecture of the whole switch systems. We present the scaling law that governs the relation between power handling capability and number of elements. We designed and built several act...
متن کاملHigh Power Rf Window and Waveguide Component. Development and Testing above 100 Mw at X-band
SLAC is committed to developing an X-band source _ capable of producing 100~MW, I-ps pulses to power the next linear collider [3]. The fust experience encountered at -, -SEAC in the X-band regime above a few megawatts was in the relativistic klystron program in cooperation with LLNL and LBL [2]. About 280 MW had been transmitted through a variety of waveguide components but at very short pulse ...
متن کاملHigh Power Testing Results of the X-band Mixed-mode Rf Windows for Linear Colliders
In this paper, we summarize the high power testing results of the X-band mixed-mode RF windows at KEK and SLAC for linear colliders. The main feature of these windows is that the combination of modes on the surface of the ceramic significantly decreases the electric and magnetic fields in the junction between the ceramic and the metal. So far two types of high power windows (with the diameter o...
متن کاملModeling of Gyroklystrons with MAGY
The self-consistent time-dependent code MAGY is presently being used for designing and modeling gyrodevices. In this paper, the code’s self-consistent capability is used to investigate three different issues relating to the operation of gyroklystron amplifiers. These are the effect of window reflection on the properties of the output waves, higher order mode excitation in nonlinear output taper...
متن کامل