On the effect of a sill on dense water formation in a marginal sea

نویسنده

  • Michael A. Spall
چکیده

The properties of water mass transformation in a semi-enclosed basin, separated from the open ocean by a sill and subject to surface cooling, are analyzed both theoretically and numerically using an ocean general circulation model. This study extends previous studies of convection in a marginal sea to the case with a sill. The sill has a strong impact on both the properties of the dense water formed in the interior and on those of the waters flowing out the marginal sea. It results in a colder interior and colder outflow compared to the case with no sill. Dynamically, this is explained by considering that the sill limits the geostrophic contours over which the open ocean/marginal sea exchange can occur. The impact of the sill, however, is not simply limited to a topographic constriction; instead the sill also decreases the stability of the boundary current, which, in turn, results in relatively large heat flux into the interior and colder outflow. The theories that relate the properties of the dense waters formed in the interior, and those of the outflow, are modified to include the impact of the sill. These are found to compare well with the numerical simulations and provide a useful tool for the interpretation of these results. These idealized simulations capture the basic features of the water mass transformation processes in the Nordic Seas and, in particular, provide a dynamical explanation for the difference between the dense waters formed and the source of the overflows water.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation and Experimental Studies of Mineral Scale Formation Effects on Performance of Sirri-C Oil Field under Water Injection

Water injection is an enhanced oil recovery method which is applied for number of reservoirs especially in the offshore fields around the world. Sea-water injection process is usually associated with important concerns affecting the efficiency, safety, and economy of the operation like formation damage, mineral scaling, early breakthrough and corrosion. Incompatibility between injected and ...

متن کامل

Effects of pH and Temperature on Oilfield Scale Formation

Water flooding is one of the most influential methods for pressure maintenance and enhanced oil recovery. However, water flooding is likely to develop the formation of oilfield scale. Scale formation in reservoirs, due to the mixing of injection water and formation water, could cause formation damage and production limit. Therefore, it is necessary to simulate the compatibility of brine and inj...

متن کامل

Effect of Weld Metal Microstructure on the Fatigue and Corrosion-Fatigue Properties of GTA-Welded 304 Stainless Steel

In this research, two different filler metals, ERNiCrMo-3 and ER309L, were used for developing different microstructure, austenite (γ) and austenite and ferrite (γ+δ) in the weld metal and fatigue properties of welded samples were evaluated in the air and sea water environments. Microstructural studies indicated a good agreement between predicted microstructures via schiffler diagram and metall...

متن کامل

Effect of Weld Metal Microstructure on the Fatigue and Corrosion-Fatigue Properties of GTA-Welded 304 Stainless Steel

In this research, two different filler metals, ERNiCrMo-3 and ER309L, were used for developing different microstructure, austenite (γ) and austenite and ferrite (γ+δ) in the weld metal and fatigue properties of welded samples were evaluated in the air and sea water environments. Microstructural studies indicated a good agreement between predicted microstructures via schiffler diagram and metall...

متن کامل

Petrography and element geochemistry of dolomites of Sibzar Formation, east of Neyshabur

The Sibzar Formation (Middle Devonian) is located about 30 km east of Neyshabur and is composed of lower dolostone with intercalations of sandstone, middle basaltic sill and upper dolostone to limy dolostone, with a thickness of 334 m. Based on the crystal size in this formation, three different types of dolomite (D1, D2, Vd) were identified and according to the textural classification of the d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008