Response to a Setpoint Change in Pid Controlled Time-delay Feedback Systems
نویسنده
چکیده
Abstract. The response to a setpoint change in PID controlled feedback systems plays an important role for the tuning methods. This response may be easily evaluated in linear systems without delay by solving the related ordinary differential equations. These equations are also obtained for system with delay, if the delay exponential term is approximated to a polynomial by one of the Padé expressions. If this simplification is avoided, one must deal with differential difference equations. In this paper their explicit solution, obtained with the method of steps, is presented. Moreover a second order equation is investigated as example and the complete set of the coefficients formulas is given.
منابع مشابه
A Novel Two-degree-of-freedom Control Strategy for Unstable Processes with Delay
A simple and practical two-degree-of-freedom control strategy is proposed for unstable processes with time delay. It can decouple load disturbance from setpoint response. By combining the theory on stabilizing PID controller proposed by Silva et al. with IMC method, the process in which the ratio of time delay to unstable time constant is smaller than 2 can be controlled effectively. Simulation...
متن کاملImproving PID Recovery from Limit Conditions
This paper addresses the performance of the PID under startup or during normal operation when the PID output becomes limited. Common techniques that have been utilized to reduce the time required to get to setpoint during process startup are reviewed. The response of the PID to conditions that limit PID operation during normal operating conditions is discussed for different implementation appro...
متن کاملComparative Analysis of Fuzzy Logic based Conventional PID Controller for Second Order System with Dead Time
This paper deals with the design of a fuzzy PID Controller (FPIDC) with dynamic gain through a fuzzy scheme. The gain factor of Proportional, Integral and Derivative is varied according to process of the proposed dead time. FPIDC is modified which depends on the normalized change of error of the controlled variable (ec) and its number of fuzzy partitions. The proposed scheme is tested for a wid...
متن کاملTwo-degree-of-freedom Control Scheme for Processes with Large Time Delay
In this paper, an analytical two-degree-of-freedom-control scheme is proposed for controlling processes with large time delay. The main contributions of this paper are that a setpoint response controller and an H∞ PID load-loop controller are developed based on optimal control theory, and control parameters are derived analytically. This structure can also be used to control integrating or unst...
متن کاملHybrid Fuzzy-PID Application in Boilers to Obtain Optimum Efficiency
Many real time processes have complex, uncertain and nonlinear dynamics. Boilers are nonlinear, time varying, multi-input multi-output (MIMO) systems, whose states generally vary with operating conditions. The major problem in controlling that system is that its drum water pressure and steam flow dynamics include an integrator that results a critically stable behavior. Conventional controller p...
متن کامل