MAGIC3D Simulations of a 500-W Ka-Band Coupled-Cavity Traveling-Wave Tube Citation
نویسندگان
چکیده
The 3-D particle-in-cell (PIC) simulations of a Ka-band coupled-cavity traveling-wave tube (CCTWT) are shown. The computational analysis of the Ka-band coupled-cavity slow-wave structure was conducted through the use of an electromagnetic PIC code MAGIC3D. The choice of a double-slot staggered RF cavity circuit was made because of a wide frequency bandwidth, moderate interaction impedance, and excellent thermal dissipation properties. We investigated the large-signal and nonlinear beam dynamics of a Ka-band CCTWT using MAGIC3D. The center frequency of the Ka-band CCTWT can be tuned from 28.4 to 30 GHz by varying the cathode voltage. Hot-test simulations show that the 84-cavity Ka-band CCTWT produces 540 W of saturated output power at 29 GHz with an electronic efficiency of 8.1% and a gain of 28 dB when the beam voltage and current are set to 17 kV and 390 mA, respectively.
منابع مشابه
Design of a V-band High-power Sheet-beam Coupled-cavity Traveling-wave Tube
The design and analysis of a high-power wideband sheetbeam coupled-cavity traveling-wave tube operating at V-band is presented. The interaction circuit employs three-slot doubly periodic staggered-ladder coupled-cavity slow-wave structure, and a 5 : 1 aspectratio sheet electron beam is used to interact with the circuit. Combined with design of the well-matched input and output couplers, a 3-D p...
متن کاملSecond Harmonic Reduction of Traveling Wave Tube Amplifier Using Ferrite Material
Traveling Wave Tubes (TWTs) consist of different elements. The most important element of TWT is the RF circuit. RF circuits in helix TWTs need a dielectric support to hold the helix; this support also has an effect in electromagnetic properties of RF circuits. A novel dielectric support is proposed to reduce the second harmonic of helix TWTs. The dielectric support in this structure consists of...
متن کاملKa - Band Linearization
The new Ka-band communications services require highly linear, high power amplifiers (HPAs). Traveling wave tube amplifiers (TWTAs) offer the best millimeter wave HPA performance in terms of power and efficiency, but are inferior to solid state power amplifiers (SSPAs) in linearity. This paper discusses techniques for improving millimeter wave HPA linearity. The significance and methods for eva...
متن کاملRain Attenuation Prediction at Ku Band Using Satellite Signal Beacon Measurement in Iran
In this paper satellite wave propagation at Ku and Ka band is considered. The design and simulation of a typical satellite beacon receiver at Ka band is designed and simulated for the future works. Also rain attenuation prediction at Ku band using satellite signal beacon measurement and simulations for Iran Telecommunication Research Center (ITRC) are presented. The measurement setup consists o...
متن کاملNon-linear modeling, analysis, design and simulation of a solid state power amplifier based on GaN technology for Ku band microwave application
A new non-linear method for design and analysis of solid state power amplifiers is presented and applied to an aluminum gallium nitride, gallium nitride (AlGaN-GaN) high electron-mobility transistor (HEMTs) on silicon-carbide (SiC) substrate for Ku band (12.4 13.6 GHz) applications. With combining output power of 8 transistors, maximum output power of 46.3 dBm (42.6 W), PAE of 43% and linear ga...
متن کامل