Stacked porous tin phosphate nanodisk anodes.
نویسندگان
چکیده
Stacked porous octahedral tin phosphate Sn(2)P(2)O(7) nanodisks, with a thickness and a width of 20 nm and 200 nm, respectively, were prepared from quenching hydrothermally prepared (SnHPO(4))(2).H(2)O at 600 degrees C. The first discharge capacity was 600 mA h g(-1) while the capacity retention, even after 220 cycles, was 93%.
منابع مشابه
Layer-by-layer graphene/TCNQ stacked films as conducting anodes for organic solar cells.
Large-area graphene grown by chemical vapor deposition (CVD) is a promising candidate for transparent conducting electrode applications in flexible optoelectronic devices such as light-emitting diodes or organic solar cells. However, the power conversion efficiency (PCE) of the polymer photovoltaic devices using a pristine CVD graphene anode is still not appealing due to its much lower conducti...
متن کاملElectrochemical Performance of Porous Carbon/Tin Composite Anodes for SodiumIon and LithiumIon Batteries
The electrochemical performance of mesoporous carbon (C)/tin (Sn) anodes in Na-ion and Li-ion batteries is systematically investigated. The mesoporous C/Sn anodes in a Na-ion battery shows similar cycling stability but lower capacity and poorer rate capability than that in a Li-ion battery. The desodiation potentials of Sn anodes are approximately 0.21 V lower than delithiation potentials. The ...
متن کاملSponge-like porous carbon/tin composite anode materials for lithium ion batteries
A novel sponge-like porous C/Sn composite is synthesized by dispersing SnO2 nanoparticles into a softtemplate polymer matrix followed by carbonization. The mesoporous C/Sn anodes can deliver a capacity as high as 1300mAh g 1 after 450 charge/discharge cycles, and provide a capacity of 180mAh g 1 even at 4000 mA g 1 charge/discharge current density. An extra reversible capacity over the theoreti...
متن کاملImproved electrochemical performance of tin-sulfide anodes for sodium-ion batteries
Due to their highly reversible capacity, tin-sulfide-basedmaterials have gained attention as potential anodes for sodium-ion and lithium-ion batteries. Nevertheless, the performance of tin sulfide anodes is much lower than that of tin oxide anodes. The aim of the present investigation is to improve the electrochemical performances of SnS anodes for sodium-ion batteries using conventional organi...
متن کاملComposite doped emeraldine–polyethylene oxide-bonded lithium-ion nano-tin anodes with electronic–ionic mixed conduction
Mixed-conducting lithium-ion doped emeraldine polyaniline (PAni)–polyethylene oxide (PEO) blends have been developed to achieve an optimal electronic– ionic conductivity balance in nano-tin composite anodes. Electrochemical evaluation was performed on the anodes with differing electrode preparation procedures, doping methods and PEO contents. Results indicate that both good electronic and ionic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 46 14 شماره
صفحات -
تاریخ انتشار 2010