First Beam Test with the Isac Separated Function Dtl
نویسندگان
چکیده
The ISAC Separated Function DTL is designed to accelerate ions of 3 ≤ A/q ≤ 6 to energies fully variable between 0.153 to 1.53 MeV/u. The DTL includes five IH-tanks with quadrupole triplets between tanks and triple gap split ring bunchers before tanks 2, 3, and 4. The final configuration of the DTL is due for commissioning in Dec. 2000. Recently a beam test with the first section of the DTL comprising the first tank, a triplet and the first buncher has been completed. The experimental set-up and the test results are reported.
منابع مشابه
Status Report on the Construction of the Isac Drift Tube Linac
The first phase of the ISAC radioactive ion beam facility at TRIUMF is well under way. It combines an isotope mass separator-on-line with a post accelerator. Required in the accelerator chain is a drift tube LINAC capable of accelerating unstable nuclei with a charge to mass ratio greater or equal to 1/6 from E = 0.15 MeV/nucleon to a final energy fully variable up to 1.5 MeV/nucleon. Due to th...
متن کاملInitial Commissioning of the Isac Rib Facility
Construction began in 1995 on ISAC, a radioactive ion beam (RIB) and accelerator facility at TRIUMF that utilises the ISOL (on-line isotope separation) production method. ISAC includes: a new building, a beam line with adequate shielding to transport up to 100 uA of 500 MeV protons to two target/ion-source stations, remote handling facilities for the targets, a high-resolution mass-separator, l...
متن کاملUpgrade of the Isac Dtl Tuning Procedure at Triumf
The TRIUMF ISAC facility has two variable energy heavy ion linacs as post accelerators for radioactive ion beams. The ISAC I linac is a warm IH-DTL with five accelerating tanks and three bunchers, the ISAC II linac uses twenty independently phased superconducting cavities. The first linac operates between 150keV/u and 1.8Mev/u; the second boosts the 1.5MeV/u injected beam by 20MV. The DTL is tu...
متن کاملDecelerating Heavy Ion Beams Using the Isac Dtl
At the ISAC facility in TRIUMF radioactive ion beams (RIB) are produced using the ISOL method and post accelerated. The post accelerator chain consists of a radio frequency quadrupole (RFQ) injector followed by a drift tube linac (DTL) that accelerates the ions from 150 keV/u up to 1.8 MeV/u. A further stage of acceleration is achieved using a superconducting linac where the beam is injected us...
متن کاملPerformances of the ISAC Heavy Ion Linacs
ISAC is the TRIUMF facility for the production and post acceleration of Rare Isotope Beams (RIBs). The post acceleration section includes two normal conducting linacs, an RFQ injector and a variable energy IH-DTL, and a superconducting linac composed of five cryomodules each containing four quarter wave bulk niobium resonators. All three machines operate CW. The RFQ and DTL deliver beam since 2...
متن کامل