Optimal Performance of Plastic Extrusion Process Using Fuzzy Goal Programming
ثبت نشده
چکیده
Abstract—This study optimized the performance of plastic extrusion process of drip irrigation pipes using fuzzy goal programming. Two main responses were of main interest; roll thickness and hardness. Four main process factors were studied. The L18 array was then used for experimental design. The individualmoving range control charts were used to assess the stability of the process, while the process capability index was used to assess process performance. Confirmation experiments were conducted at the obtained combination of optimal factor setting by fuzzy goal programming. The results revealed that process capability was improved significantly from -1.129 to 0.8148 for roll thickness and from 0.0965 to 0.714 and hardness. Such improvement results in considerable savings in production and quality costs.
منابع مشابه
USING FUZZY GOAL PROGRAMMING TECHNIQUE IN OPTIMAL CROPPING PATTERN
Determination of optimal cropping pattern is essential for arid and semiarid regions. Lorestan province is located in the west part of Iran with mean annual precipitation from 50 to 1000 mm and in most parts of this province water resources for agriculture are deficit. Khoramabad region with semi-arid climate is located in Lorestan province with mean annual rainfall of 373 mm. The purpose of th...
متن کاملInfluence of fuzzy Goal Programming in Production Optimization Case study: Cement Industry
Using the mathematic techniques such as Fuzzy approach has useful outcomes for production planning in different sources. In this paper LGP1 was used to model the objectives such as: avoidance of shortage or surplus of demand, access to maximum of income, using the normal capacity of production and organizing the inventory of warehouse, within the framework of Goal constraints like balancing b...
متن کاملSupplier’s Selection Based on Lean-Green Production Indicators by Goal Programming, Fuzzy DEMATEL and Fuzzy Quality Function Development
One of the most important parts of the green supply chain management (GSCM) is the green supplier. The green supplier selection process has a vague nature. Therefore, specific approaches, such as fuzzy, are necessary during their evaluation. On the other hand, the choice of a coherent and integrated strategy is vital to achieve lean and green production. Accordingly, the present study aimed to ...
متن کاملDesign of Synthetic Optimizing Neuro Fuzzy Temperature Controller for Twin Screw Profile Plastic Extruder Using Labview
Problem statement: The temperature control in plastic extrusion machine is an important factor to produce high quality plastic products. The first order temperature control system in plastic extrusion comprises of coupling effects, long delay time and large time constants. Controlling temperature is very difficult as the process is multistage process and the system coupled with each other. In o...
متن کاملRecent Methods for Optimization of Plastic Extrusion Process: A Literature Review
Plastic extrusion has been a challenging process for many manufacturers and researchers to produce products meeting requirements at the lowest cost. Faced with global competition in plastic-products industry, using the trial-anderror approach to determine the process parameters for plastic extrusion is no longer good enough. During production, quality characteristics may deviate due to drifting...
متن کامل