All laserassisted heteroepitaxial growth of Si0.8Ge0.2 on Si(100): Pulsed laser deposition and laser induced melting solidification
نویسندگان
چکیده
Related Articles Optimal algorithm for spray pyrolysis deposition of TiO2 films by using an industrial robot J. Renewable Sustainable Energy 4, 053126 (2012) Omnidirectional reflection from nanocolumnar TiO2 films J. Appl. Phys. 112, 084317 (2012) Prevention of dewetting during annealing of FePt films for bit patterned media applications Appl. Phys. Lett. 101, 092402 (2012) Fluid dynamics and mass transport in organic vapor jet printing J. Appl. Phys. 111, 043501 (2012) Composition dependent nanocolumn tilting angle during the oblique angle co-deposition Appl. Phys. Lett. 100, 033106 (2012)
منابع مشابه
Pulsed Laser Porosification of Silicon Thin Films
We present a new and simple laser-based process to porosify thin film silicon using a pulsed laser. During deposition, we incorporate gas atoms or molecules into the Si thin film. Pulsed laser radiation of wavelength λ = 532 nm heats up thin film Si beyond its melting point. Upon heating, gas atoms or molecules form nm-sized thermally expanding gas bubbles in the silicon melt, until they explos...
متن کاملAnalysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy
The weldability of GTD-111 nickel-based superalloy by pulsed Nd:YAG laser welding with an average power of 250 W was studied, and the microstructural evolution and cracking characteristics were also investigated. The solidification cracking of the fusion zone (FZ) and the intergranular liquation cracking in the heat affected zone (HAZ) were observed in the joint. Solidification cracking was cau...
متن کاملImplicit Enthalpy Method for Modelling Laser Induced Melting and Solidification of Silicon
This paper presents a numerical study of laser induced melting and solidification of crystalline Silicon (Si) using an implicit enthalpy method. The simulations are performed using the open source C++ solver known as OpenFOAM [1]. The model considers temperature dependent thermo-physical and optical properties for Si. To verify the numerical model, its predictions are compared with the experime...
متن کاملOrientation of MgO thin films on Si(001) prepared by pulsed laser deposition
Pulsed laser deposition method was employed to grow MgO thin films with preferred orientation on bare Si(100) and SiO2/Si(100) substrates. The orientation of MgO thin films was systematically investigated by varying deposition parameters. XRD analysis showed that the preferred orientation of MgO thin films would change from (111) to (100) when laser fluence decreased and oxygen pressure increas...
متن کاملInvestigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds
In the present study, the microstructure of welded zone of Hastelloy X sheets with thickness of 1 mm via pulsed Nd-YAG laser welding were studied. This welding process was done by autogenus and conductive method. Microstructure were observed by metallurgical OM and SEM. Results shown Solidification of the weld metal is dendritic. The dendrites in the central zone of the welding are fine and equ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012