Discussion of ‘ A new approach of selecting real input ground motions for seismic design : The most unfavourable real seismic design
نویسنده
چکیده
Right Copyright © 2009 John Wiley & Sons, Ltd.; This is the pre-peer reviewed version of the following article: Abbas Moustafa, Discussion of ‘A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions’ by C-H Zhai and L-L Xie, Earthquake Engineering & Structural Dynamics, 38/9, 1143-1149, 2009, which has been published in final form at http://dx.doi.org/10.1002/eqe.885 NAOSITE: Nagasaki University's Academic Output SITE
منابع مشابه
Numerical Solution of Seismic Wave Propagation Equation in Uniform Soil on Bed Rock with Weighted Residual Method
To evaluate the earth seismic response due to earthquake effects, ground response analyses are used to predict ground surface motions for development of design response spectra, to compute dynamic stresses and strains for evaluation of liquefaction hazards, and to determine the earthquake induced forces that can lead to instability of earth and earth-retaining structures. Most of the analytical...
متن کاملImprovement of Iranian Seismic Design Code Considering the Near-Fault Effects
Characteristics of ground motions close to the earthquake source can be considerably different from those of far-field motions which should be considered in design process of structures. The current study aimed to present new design response spectra for Iranian seismic design code taking into account the near-fault effects. For this purpose, a new attenuation relation based on the ground motion...
متن کاملSEISMIC ENERGY DEMANDS OF INELASTIC BUILDINGS DESIGNED WITH OPTIMUM DISPLACEMENT-BASED APPROACH
In present study, the effects of optimization on seismic energy spectra including input energy, damping energy and yielding hysteretic energy are parametrically discussed. To this end, 12 generic steel moment-resisting frames having fundamental periods ranging from 0.3 to 3s are optimized by using uniform damage and deformation approaches subjected to a series of 40 non-pule strong ground motio...
متن کاملSeismic Yield Displacement Profile in Steel Eccentrically Braced Frames
Displacement-based methods are recognized as appropriate approaches to reach the goals of performance-based seismic design method. In the direct displacement-based seismic design method, the seismic yield displacement is applied as one of the important design parameters. In this paper, a new relation is suggested to determine the lateral displacement pattern at first yielding of eccentrically b...
متن کاملERFORMANCE-BASED SEISMIC DESIGN OPTIMIZATION OF COMPOSITE MOMENT RESISTING FRAMES WITH CONCERETFILLED STEEL COLUMNS AND STEEL BEAMS
In this paper, an optimization framework is developed for performance-based seismic design of composite moment frames consisting of concrete filled steel box columns and I-shaped steel beams. Material cost of the structure and seismic damage under severe earthquake ground motions are minimized as objective functions. Two design examples are presented to demonstrate the applicability and efficie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017