Electroanalytical applications of nanocomposites from conducting polymers and metallic nanoparticles prepared by layer-by-layer deposition*
نویسندگان
چکیده
Layer-by-layer (LbL) deposition is a convenient technique for the formation of ultra thin nanocomposite layers containing metallic nanoparticles (NPs) and conducting polymers (CPs). The advantages of this approach for producing composite layers suitable for electroanalytical applications are discussed. Examples of electroanalytical applications of LbL-deposited composites are presented. Composite layers consisting of polyaniline (PANI) and Pd NPs are used for hydrazine oxidation. The PANI–Au NPs system is applied for dopamine (DA) and uric acid (UA) oxidation.
منابع مشابه
Preparation of CdIn2S4-CdS nanocomposite via a green route and using them in dot-sensitized solar cells for boosting efficiency
In this work In2S3 and CdS nanoparticles were prepared by a simple hydrothermal method and then annealed at 500 °C for 2 h in an Ar gas until CdIn2S4(CdIS)-CdS nanocomposites were formed. Afterwards, efficiency of the as-synthesized CdIS-CdS nanocomposite in quantum dot-sensitized solar cells (QDSSCs) was evaluated. For this purpose, the as-prepared CdIS-CdS nanocomposites were deposited on TiO...
متن کاملFabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملFabrication of dye sensitized solar cells with a double layer photoanode
Dye sensitized solar cell was fabricated from a double layer photoanode. First, TiO2 nanoparticles were synthesized by hydrothermal method. These TiO2 NPs were deposited on FTO glasses by electrophoretic deposition method in applied voltage of 5 V and EPD time of 2.5-10 min. Then TiO2 hollow spheres (HSs) were synthesized by sacrificed template method with Carbon Spheres as template and TTIP ...
متن کاملWater-based Double Layer Functionalized Iron Oxide Nanoparticles for Enhanced Gene Delivery Applications
Iron oxide nanoparticles (magnetite (Fe3O4), hematite (Fe2O3)) have been received increasing attention in drug and gene delivery. In this work, water-base double layer functionalized iron oxide nanoparticles (DL-IONPs) were designed and prepared of a biodegradable, biocompatible carrier by co-precipitation method with high DNA loading capacity due to self-assembly of a second organic layer. The...
متن کاملInvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
Radar absorbing materials, i.e. magnetite (Fe3O4) coated carbon fibers (MCCFs) were fabricated by electro-deposition technique. Black-colored single spinel phase Fe3O4 nanoparticles was easily synthesized by hydrothermal method using reduction of a Fe (III) - Triethanolamine complex in an aqueous alkaline solution at 60-80 ◦C. Uniform and compact Fe3O4 films were fabricated on nitric acid treat...
متن کامل