Microstructured Optical Fiber for X-ray Detection
نویسنده
چکیده
A novel scintillating optical fiber is presented using a composite micro-structured quartz optical fiber. Scintillating materials are introduced into the multiple inclusions of the fiber. This creates a composite optical fiber having quartz as a cladding with an organic scintillating material core. X-ray detection using these fibers is compared to a collimated cadmium telluride (CdTe) detector over an energy range from 10 to 40 keV. Results show a good correlation between the fiber count rate trend and that of the CdTe detector.
منابع مشابه
Anthracene Fibers Grown in a Microstructured Optical Fiber for X-ray Detection
Anthracene fibers are grown inside a microstructured quartz matrix to form a multicore optical fiber for X-ray detection. A modified fiber growth method for single crystal anthracene from the melt via the Bridgman-Stockbarger technique is presented. The anthracene fiber is characterized by using spectrophotometry, Raman spectroscopy, and X-ray diffraction. These results show the anthracene grow...
متن کاملAlkali Halide Microstructured Optical Fiber for X-ray Detection
Microstructured optical fibers containing alkali halide scintillation materials of CsI(Na), CsI(Tl), and NaI(Tl) are presented. The scintillation materials are grown inside the microstructured fibers using a modified BridgmanStockbarger technique. The x-ray photon counts of these fibers, with and without an aluminum film coating are compared to the output of a collimated CdTe solid state detect...
متن کاملRaman Spectra of a PMMA Microstructured Optical Fibre and Direct Measurement of Its Gain Coefficient
A polymethylmethacrylate (PMMA) microstructured polymer optical fiber (mPOF) is fabricated and characterized. Using the cut-back technique the fiber loss is measured which is higher than the step-index silica fibers. Through a novel experimental scheme, the backward Stokes spectrum of the fabricated mPOF is recorded over a range exceeding 3000 cm‑1 during the cut-back method and compared ...
متن کاملMeasuring acetone using microstructured optical fiber and Raman spectroscopy
A novel approach using microstructured optical fiber and Raman spectroscopy for identifying acetone is reported. This technique combines the advantage of small sampling volume of microstructured optical fiber and the specificity of Raman spectroscopy.
متن کاملAccuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites
The present study introduces two quantitative parameters to compare the accuracy of ultrasonic C-scan testing and X-ray radiography methods in the damaged area detection under low-velocity impact in polymer-based composites. For this purpose, the hand lay-up technique of composite processing was employed to prepare the composite specimen. A composite specimen consisting of the glass fiber reinf...
متن کامل