Facile, One-Pot, Two-Step, Strategy for the Production of Potential Bio-Diesel Candidates from Fructose

The production of bio-diesel fuels from carbohydrates is a promising alternative to fossil fuels with regard to the growing severity of the environmental problem and energy crisis. Potential bio-diesel candidates or additives, such as 5-(hydroxymethyl)-2-(dimethoxymethyl) furan (HDMF), 2-(dimethoxymethyl)-5-(methoxymethyl) furan (DMMF), and 5-(methoxymethyl)-2-furaldehyde (MMF) could be produced from the alcoholic solutions of both 5-HMF and fructose in the presence of solid acid catalysts. In the present study, a readily prepared, silica, gel-supported nitric acid (SiO2-HNO3) catalyst was found to be exceptionally reactive for the production of HDMF from fructose. A DMSO-methanol biphasic solvent system was developed and HDMF, DMMF, and MMF were observed at 150 ◦C, with maximum yields of 34%, 34%, and 25%, respectively. Meanwhile, a maximum HDMF yield of 77% was obtained from 5-HMF in methanol. Moreover, a sequential, one-pot, two-step dehydration/acetalization process, involving the dehydration of fructose to 5-HMF in dimethylsulfoxide (DMSO) at 150 ◦C, and followed by adding a certain amount of methanol to react with the formed 5-HMF to HDMF at 100 ◦C, was developed to promote the yield of HDMF. The optimum yield of HDMF reached 70% with the complete conversion of fructose. The reaction mechanisms of dehydration and acetalization have been proposed for the conversion of 5-HMF to HDMF. The two-step design allows for facile catalyst recycling while supplying as a promising method for the production of biodiesel from complex carbohydrates.