Research of Enhancement Efficiency of Field Strength Coupled into Slots
نویسندگان
چکیده
This paper studies the enhanced efficiency of the field strength coupled into slots by using the finite difference time domain method. The coupled field strength with the different slots shape, size, and polarization direction is assisted, some useful rules are concluded. The easiest to form enhanced efficiency of field strength is rectangular slots, square slots are the second, and the most difficult slots are round. For aspect ratios (long side/short side) of the rectangular slots, the bigger the more easily to form enhanced efficiency. When the polarization direction is perpendicular to the short side of rectangular slots, it is harder to form slots enhanced efficiency. This paper provides a practical method to research enhanced efficiency, it also provides theory basis for the slot shape selection, slot size design, and the polarization direction selection to improve the efficiency of the shield.
منابع مشابه
Effect of Cell Size and Shape on Electric Field Threshold and Critical Transmembrane Voltage for Electroporation
Introduction: Electroporation is a technique for increasing the permeability of the cell membrane to otherwise non-permeate molecules due to an external electric field. This permeability enhancement is detectable if the induced transmembrane voltage becomes greater than a critical value which depends on the pulse strength threshold. In this study, the variabil...
متن کاملCooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine
Wind energy is used to rotate a magnetic turbine in order to remove heat from the surface of a photovoltaic (PV) panel. A three-bladed turbine, which rotates with wind energy, has rotational motion underneath the studied PV panel in order to move Magnetic Nano-Particles (MNPs). In addition, effects of the magnetic field strength (B=450-830 mT), rotational velocity of the magnetic turbine (ω), a...
متن کاملSteel Plate Characteristic Effecting on Composite Coupled Beam at Concrete Shear Wall
Composite couple beams are the concrete elements consisting of longitudinal bars and steel plate, therefore suitable for shear transferring in couple shear walls with arranged gates in its height. In this paper, after modeling couple beams with and without steel plates with F.E methods and calibration the models with experimental results, effects of parameters such as thickness, height, length ...
متن کاملDesign, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملAn Experimental Correlation for Friction Factor in Horizontal Pipe with Trapezoidal Section Inner Longitudinal Slots for Conveying of Solids
In order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. The test rig has longitudinal trapezoidal slots in its conveying pipes. Through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and Froude number is presented. It is shown that the mixture friction factor for pipes with inn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JSW
دوره 7 شماره
صفحات -
تاریخ انتشار 2012