Quantitative AFM analysis of phase separated borosilicate glass surfaces

نویسنده

  • D. Dalmas
چکیده

Phase separated borosilicate glass samples were prepared by applying various heat treatments. Using selective chemical etching we performed AFM measurement on the phase separated glass surfaces. A quantitative roughness analysis allowed us to measure precisely the dependence of the characteristic size of the phase domains on heating time and temperature. The experimental measurements are very well described by the theoretically expected scaling laws. Interdiffusion coefficients and activation energy are estimated from this analysis and are consistent with literature data.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Doctor blade sol-gel deposition of a nano-composite copper-zinc oxide on borosilicate glass for advanced oxidative degradation of textille dye in water environment

Nano-composite copper-zinc oxide (NCCZO) was deposited on borosilicate glass using a novel sol-gel/doctor-blade technique. The photocatalyst was prepared from copper acetylacetonate, zinc acetylacetonate, monoethanolamine (MEA) and citric acid monohydrate at 75 oC, aged for 1 d and annealed at 650 oC. The properties of the NCCZO nano-composite were investigated by X-ray diffraction (XRD) and fi...

متن کامل

Imaging of Mechanical Properties of Soft Matter

In recent years the atomic force microscope (AFM) has evolved from a high resolution imaging tool to an enabling platform for physical studies at the nanoscale including quantitative mapping of mechanical characteristics of surfaces providing simultaneous topography and mechanical property maps across the length scales. In the work presented here peak force tapping AFM was utilized to elaborate...

متن کامل

Gold nanoparticles deposited on glass: physicochemical characterization and cytocompatibility

Properties of gold films sputtered under different conditions onto borosilicate glass substrate were studied. Mean thickness of sputtered gold film was measured by gravimetry, and film contact angle was determined by goniometry. Surface morphology was examined by atomic force microscopy, and electrical sheet resistance was determined by two-point technique. The samples were seeded with rat vasc...

متن کامل

Analysis of bacterial adhesion using a gradient force analysis method and colloid probe atomic force microscopy.

The atomic force microscope (AFM) has been used to examine the stickiness of bacteria on the basis of the analysis of approach and retraction force curves between the AFM tip and the bacterial surface. One difficulty in analyzing approach curve data is that the distance between the AFM tip and the surface of the bacterium is difficult to define. The exact distances are difficult to determine be...

متن کامل

Microphase separation at the surface of block copolymers, as studied with atomic force microscopy.

Atomic force microscopy (AFM) is used to study the phase separation process occurring in block copolymers in the solid state. The simultaneous measurement of the amplitude and the phase of the oscillating cantilever in the tapping mode operation provides the surface topography along with the cartography of the microdomains of different mechanical properties. This technique thus allows to charac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006