Characterization of back surface morphology for corrosion detection using patterned heat sources
نویسندگان
چکیده
Characterization of back surface roughness is investigated for specimens exhibiting corrosion and for prepared samples with milled channels of varying geometry. An area heating source is used initially to provide one-dimensional heating of the specimen which allows plate thinning, disbanding, or presence of corrosion to be rapidly detected. A focused heating source is then used to characterize the suspect regions through the interaction of lateral heat flow with back surface roughness.
منابع مشابه
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology
Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °...
متن کاملEffect of surface passivation on corrosion of a cobalt-chromium dental alloy: surface morphology and chemical composition studies
Abstract Background and Aim: Biocompatibility in some respects depends on the corrosion behavior of dental alloys. The purpose of this study was to investigate the effect of surface passivation of a cobalt chromium alloy on corrosion behavior. Materials and methods: In this experimental study, 20 samples of Flexicast dental alloy were prepared according to ADA97 standard and after casting, t...
متن کاملCorrosion Resistance Enhancement of AZ91 Magnesium Alloy Using Ni-P Interlayer and Electrophoretic Deposited 3YSZ Coating
The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...
متن کاملTranexamic Acid as Novel Corrosion Inhibitor for X60 Steel in Oil Well Acidizing Fluids: Surface Morphology, Gravimetric and Electrochemical Studies
The corrosion inhibition of API 5L X60 pipeline steel in oil well acidizing fluid stimulated with 1.0 M HCl by Tranexamic Acid (TXA) was investigated using potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) and the conventional gravimetric or weight loss (WL) techniques at temperatures ranging from 303 to 323 K. Surface morphological analysis was carried out us...
متن کاملEffect of heat treatment on structure and properties of multilayer Zn-Ni alloy coatings
Composition modulated multilayer alloy (CMMA) coatings of Zn-Ni were electrodeposited galvanostatically on mild steel (MS) for enhanced corrosion protection using single bath technique. Successive layers of Zn-Ni alloys, having alternately different composition were obtained in nanometer scale by making the cathode current to cycle between two values, called cyclic cathode current densities (CC...
متن کامل