Unique Static Magnetic and Dynamic Electromagnetic Behaviors in Titanium Nitride/Carbon Composites Driven by Defect Engineering
نویسندگان
چکیده
Recently, the defect-induced static magnetic behaviours of nanomaterials have been a cutting-edge issue in diluted magnetic semiconductor materials. However, the dynamic magnetic properties of nanomaterials are commonly ignored if their bulk counterparts are non-magnetic. In the present research, titanium nitride-carbon (TiN/C) nanocomposites were found to exhibit both static and dynamic magnetic properties that vary in the opposite trend. Moreover, novel unconventional electromagnetic resonance behaviour was demonstrated in TiN/C systems, and their permeability and permittivity show similar trend. This is challenging for the traditional understanding of electromagnetism and makes it possible to achieve an appropriate balance between the permeability and permittivity simultaneously in a simple system. Hopefully, the results could provide some valuable clues to revealing the magnetism and electromagnetism of nanostructures.
منابع مشابه
Vibration Analysis of Timoshenko Beam reinforced with Boron-Nitride Nanotube on Elastic Bed
In this paper, free vibration analysis of a polymer-based nano-composite beam reinforced by boron-nitride nanotubes and subjected on elastic foundation, is studied. Smooth and defect-free nanotubes with uniform and directly- orientated in matrix are intended. Also, nanotubes’ distribution in the thickness direction of beam is regarded as a uniform distribution of the three different targeted on...
متن کاملEvaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE)
Determination of the pile capacity is always a major concern for the safe geotechnical engineering design. Different direct and indirect methods have been proposed for determining pile bearing capacity such as static and dynamic approaches. Each method depends on the condition of the soil and type of pile as well as accessibility to necessary information. In this study bearing capacity of drive...
متن کاملProducing the titanium nano composite statically compacted with the different pressure and investigation of the mechanical properties
Building the Nano composites for getting material with combinational properties and improving properties of currently used material has been taken significant attention. One of the ways of building Nano composites is using a method known as powder metallurgy. Because with this method not only wastes are decreased to minimum but we can also mix the materials with high melting point with the mate...
متن کاملDecorative Titanium Nitride Colored Coatings on Bell-Metal by Reactive Cylindrical Magnetron Sputtering
The transition metal nitrides like titanium nitride exhibit very interesting color variation properties depending on the different plasma deposition conditions using cylindrical magnetron sputtering method. It is found in this deposition study that nitrogen partial pressure in the reactive gas discharge environment plays a significant role on the color variation of the film coatings on bell-met...
متن کاملEffect of carbon black content on the microwave absorbing properties of CB/epoxy composites
To prevent serious electromagnetic interference, a single-layer and double layer wave-absorbing coating employing complex absorbents composed of carbon black with epoxy resin as matrix was prepared. The morphologies of carbon black /epoxy composites were characterized by scanning electron microscope and atomic force microscope, respectively. The carbon black particles exhibit obvious polyarom...
متن کامل