I ) Progress Report on Directional Solidification of AI 2
نویسنده
چکیده
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE Final 3. DATES COVERED (From To)
منابع مشابه
Directional solidification of metal-gas eutectic and fabrication of regular porous metals
Directional solidification of metal-gas eutectic (Gasar) is a novel process for making regular porous metals. This process is based on a solid-gas eutectic reaction involving a gaseous medium and a metal or a ceramic phase, and allows an easy control of the porosity, such as its pore size, pore orientation and morphology in a wide range by properly adjusting its melting and solidification condi...
متن کاملSuperdendrites in Directional Solidification of Polymer-solvent Mixtures
The directional solidification of the transparent binary alloy succinonitrile-poly(ethylene oxide) was studied in an experiment in which solidification speeds of about 2 mm/sec could be reached without loss of the linear temperature gradient. The low diffusivity of the polymer solute allowed the study of the dynamics of rapid solidification using an optical microscope. For both normal and doubl...
متن کاملON THE FORMATION OF STRAY GRAINS IN DIRECTIONALLY-SOLIDIFIED NI-BASED SUPERALLOYS WITH VARYING CROSS SECTIONS
Formation of stray grain defects particularly around re-entrant features of the turbine blade airfoils is one of the major problems in directional and single crystal solidification processes. In this work, directional solidification tests of the GTD-111 Ni-based superalloy were conducted at different withdrawal velocities of 3, 6 and 9 mm.min-1 using various stepped cylindrical and cubic design...
متن کاملCharacterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
Manufactured single crystal components using Ni-base super alloys are routinely used in the hot sections of aero engines and industrial gas turbines due to their outstanding high temperature strength, toughness and resistance to degradation in corrosive and oxidative environments. To control the quality of the single crystal turbine blades, particular attention has been paid to grain selection,...
متن کاملModeling on Directional solidification of Silicon for Solar Cell Applications
The Directional Solidification is a very important technique for growing high quality multi-crystalline silicon at large scale for PV solar cells. The physics governing the growth of multi-crystalline silicon in the Directional Solidification System involves complex non-linear transport phenomena including but not limited to heat transfer, solidification, thermal stress development, and the for...
متن کامل