All-Silicon Raman Laser with Quasi-Phase-Matched Structures and Resonators

نویسنده

  • Isao Tomita
چکیده

The principle of all-silicon Raman lasers for an output wavelength of 1.3 μm is presented, which employs quasi-phase-matched structures and resonators to enhance the output power. 1.3-μm laser beams for GE-PONs in FTTH systems generated from a silicon device are very important because such a silicon device can be monolithically integrated with the silicon planar lightwave circuits (Si PLCs) used in the GE-PONs. This reduces the device fabrication processes and time and also optical losses at the junctions between optical waveguides of the Si PLCs and Si laser devices when compared with 1.3-μm III-V semiconductor lasers set on the Si PLCs employed at present. We show that the quasi-phase-matched Si Raman laser with resonators can produce about 174 times larger laser power at 1.3 μm (at maximum) than that without resonators for a Si waveguide of Raman gain 20 cm/GW and optical loss 1.2 dB/cm, pumped at power 10 mW, where the length of the waveguide is 3 mm and its cross-section is (1.5 μm). Keywords—All-silicon raman laser, FTTH, GE-PON, quasi-phase-matched structure, resonator.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures

In the current work, the effect of surface morphology on light emission property and absorption behavior of quasi-columnar macro-porous silicon (PS) was investigated. PS structures with different morphology were synthesized using photo-electrochemical etching method by applying different etching current densities. SEM micrographs showed that empty macro-pores size and porosity of PS layers were...

متن کامل

Tunable ring resonators for silicon Raman laser and amplifier applications

Recently, low threshold Raman silicon lasers based on ring resonator architecture have been demonstrated. One of the key elements of the laser cavity is the directional coupler that couples both pump and signal light in and out of the ring resonator from the bus waveguide. The coupling coefficients are crucial for achieving desired laser performance. In this paper, we report design, fabrication...

متن کامل

Nanophotonic devices on thin buried oxide Silicon-On-Insulator substrates.

We demonstrate a silicon photonic platform using thin buried oxide silicon-on-insulator (SOI) substrates using localized substrate removal. We show high confinement silicon strip waveguides, micro-ring resonators and nanotapers using this technology. Propagation losses for the waveguides using the cutback method are 3.88 dB/cm for the quasi-TE mode and 5.06 dB/cm for the quasi-TM mode. Ring res...

متن کامل

Add-Drop and Channel-Drop Optical Filters Based on Photonic Crystal Ring Resonators

Here, we propose an add-drop and a channel drop filter based on two-dimensional photonic crystal all circular ring resonators. These structures are made of a square lattice of silicon rods with the refractive index n1=3.464 surrounded by air (with refractive index n2=1). The broadest photonic band gap occurs at the filling ratio of r/a = 0.17. Two linear defect W1 waveguides couple to the ring....

متن کامل

Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching

In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017