Functional Requirements Overview For a 50 - MW ( t ) Liquid - Salt Intermediate Loop for NGNP
نویسندگان
چکیده
Liquid salts (LS) provide an important candidate fluid for high-temperature heat transport for hydrogen production and other applications, due to their high volumetric heat capacities and boiling temperatures. This report discusses functional requirements for a 50 MW(t) LS intermediate loop, designed for heat transfer between hightemperature, high-pressure helium and process heat exchangers for hydrogen production, for the Next Generation Nuclear Plant (NGNP) [1]. Figure 1 provides a preliminary flow diagram for a liquid-salt intermediate heat transport system for the NGNP. This work extends previous UCB development and design for a 50 MW(t) intermediate heat exchanger (IHX) for the NGNP [2], by identifying key functional requirements for the intermediate loop.
منابع مشابه
Conceptual Design for a 50 MW ( t ) Metallic Intermediate Heat Exchanger for the Next Generation Nuclear Plant
This UCB report summarizes preliminary design analysis for the 50 MW(t) intermediate heat exchanger (IHX) for the demonstration of hydrogen production with the Next Generation Nuclear Plant (NGNP). Sulfur-iodine (SI) hydrogen production efficiency is maximized when sulfuric acid decomposition is performed at a low pressure (~1 MPa) compared to the NGNP primary coolant pressure (~7 MPa). For a m...
متن کاملPg. 1 of 1 Development Approaches for the Advanced High Temperature Reactor
The AHTR is a pool-type reactor with graphite matrix coated-particle fuel and a clean molten salt coolant [1]. Due to the very high thermal inertia provided by the pool configuration and molten-salt coolant of the AHTR, the thermal power of the AHTR can be substantially higher than an equivalent gas-cooled reactor, likely exceeding 2000 MW(t). The AHTR, with a molten-salt intermediate loop and ...
متن کاملThe Advanced High-Temperature Reactor: High-Temperature Fuel, Molten Salt Coolant, and Liquid-Metal-Reactor Plant
The Advanced High-Temperature Reactor is a new reactor concept that combines four existing technologies in a new way: (1) coated-particle graphite-matrix nuclear fuels (traditionally used for helium-cooled reactors), (2) Brayton power cycles, (3) passive safety systems and plant designs from liquid-metal-cooled fast reactors, and (4) low-pressure molten-salt coolants with boiling points far abo...
متن کاملApplication of multipurpose dimethyl formamide-like task specific ionic liquid as a recyclable reagent for direct iodination of alcohols
A direct and an efficient conversion of a wide range of primary, secondary even tertiary alcohols to the corresponding iodides have been achieved under ionic liquid conditions. The method involves preparation of ionic liquid-based iminium chloride intermediate from DMF-like ionic liquid then stirring it with alcohol in present of sodium iodide. The higher yields of alkyl iodides were obtained w...
متن کاملApplication of multipurpose dimethyl formamide-like task specific ionic liquid as a recyclable reagent for direct iodination of alcohols
A direct and an efficient conversion of a wide range of primary, secondary even tertiary alcohols to the corresponding iodides have been achieved under ionic liquid conditions. The method involves preparation of ionic liquid-based iminium chloride intermediate from DMF-like ionic liquid then stirring it with alcohol in present of sodium iodide. The higher yields of alkyl iodides were obtained w...
متن کامل