Determination of Young’s modulus of Sb2S3 nanowires by in situ resonance and bending methods
نویسندگان
چکیده
In this study we address the mechanical properties of Sb2S3 nanowires and determine their Young's modulus using in situ electric-field-induced mechanical resonance and static bending tests on individual Sb2S3 nanowires with cross-sectional areas ranging from 1.1·10(4) nm(2) to 7.8·10(4) nm(2). Mutually orthogonal resonances are observed and their origin explained by asymmetric cross section of nanowires. The results obtained from the two methods are consistent and show that nanowires exhibit Young's moduli comparable to the value for macroscopic material. An increasing trend of measured values of Young's modulus is observed for smaller thickness samples.
منابع مشابه
Fracture strength and Young’s modulus of ZnO nanowires
The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 μm were manipulated with an atomic force microscopy tip mounted on a nanomanipulator inside a scanning electron microscope. The fracture strain of (7.7 ± 0.8)% measured in the bending test was fou...
متن کاملOn the size-dependent elasticity of penta-twinned silver nanowires
Penta-twinned metallic NWs have recently received much attention due to their excellent mechanical properties. However, their elasticity size effect remains not well understood due to the large discrepancy in the reported experimental and simulation results. This paper reports an experimental effort to address the discrepancy about the size-dependent Young’s modulus of penta-twinned Ag NWs. Two...
متن کاملYoung s Modulus of Single and Double Walled Carbon Nanocones Using Finite Element Method(TECHNICAL NOTE)
In this paper a three-dimensional finite element (FE) model of carbon nanocones (CNCs) is proposed and used for obtaining Young\'s modulus of CNCs. In this model, stretching and bending forces between carbon atoms are simulated using truss elements in ANSYS software. Then the model is subjected to the tension and by obtaining the stiffness of the CNC and using elasticity theory, Young’s modulus...
متن کاملEffect of different oxide thickness on the bending Young’s modulus of SiO2@SiC nanowires
The surface or sheath effect on core-shell nanowires plays an important role in the nanomechanical test. In the past few years, SiC nanowires have been synthesized using various methods with an uneven and uncontrollable amorphous silicon dioxide sheath. The bending Young's modulus of the SiC nanowires has scarcely been measured, and the effect of the oxide sheath has not been taken into account...
متن کاملClosed-form Molecular Mechanics Formulations for the 3D Local Buckling and 2D Effective Young’s Modulus of the Nanosheets
A closed form three-dimensional solution is presented for determination of the local buckling (cell buckling) load of the nanosheets. Moreover, an expression is proposed for the effective 2D Young’s modulus of the unit cell of the nanosheet. In this regard, a three-dimensional efficient space-frame-like geometrical model with angular and extensional compliances is considered to investigate stab...
متن کامل