Validation of Different Combination of Three Reversing Half-Hitches Alternating Posts (RHAPs) Effects on Arthroscopic Knot Integrity
نویسندگان
چکیده
Introduction With arthroscopic techniques being used, the importance of knot tying has been examined. Previous literature has examined the use of reversing half-hitches on alternating posts (RHAPs) on knot security. Separately, there has been research regarding different suture materials commonly used in the operating room. The specific aim of this study was to validate the effect of different stacked half-hitch configuration and different braided suture materials on arthroscopic knot integrity. Methods Three different suture materials tied with five different RHAPs in arthroscopic knots were compared. A single load-to-failure test was performed and the mean ultimate clinical failure load was obtained. Results Significant knot holding strength improvement was found when one half-hitch was reversed as compared to baseline knot. When two of the half-hitches were reversed, there was a greater improvement with all knots having a mean ultimate clinical failure load greater than 150 newtons (N). Comparison of the suture materials demonstrated a higher mean ultimate clinical failure load when Force Fiber® was used and at least one half-hitch was reversed. Knots tied with either Force Fiber® or Orthocord® showed 0% chance of knot slippage while knots tied with FiberWire® or braided fishing line had about 10 and 30% knot slippage chances, respectively. Conclusions A significant effect was observed in regards to both stacked half-hitch configuration and suture materials used on knot loop and knot security. Caution should be used with tying three RHAPs in arthroscopic surgery, particularly with a standard knot pusher and arthroscopic cannulas. The findings of this study indicated the importance of three RHAPs in performing arthroscopic knot tying and provided evidence regarding discrepancies of maximum clinical failure loads observed between orthopaedic surgeons, thereby leading to better surgical outcomes in the future.
منابع مشابه
Additional Half Hitch is Necessary for Knot Tying in Arthroscopic Shoulder Surgery: A mechanical testing Study
INTRODUCTION: Orthopaedic surgeons have focused on improving the functional and structural outcomes of arthroscopic rotator cuff repair and labral repair through the development of biomechanically superior surgical techniques such as double-row fixation, suture-bridge fixation, and compression double-row fixation. To obtain the maximum benefit from these repair techniques, secure knot tying is ...
متن کاملArthroscopic knots: determining the optimal balance of loop security and knot security.
PURPOSE The purpose of this study was to determine the optimal knot configuration that maximized both knot and loop security when tied with 2 different types of nonabsorbable, braided suture. TYPE OF STUDY In vitro biomechanical study. METHODS Six commonly used arthroscopic sliding knots (Duncan loop, Nicky's knot, Tennessee slider, Roeder knot, SMC knot, Weston knot) with and without a ser...
متن کاملPerformance Comparison of a Pretied Suture Knot With Three Conventional Arthroscopic Knots.
PURPOSE To compare the knot characteristics of a pretied suture knot with 3 of the most commonly used arthroscopic knots tied with various high-strength sutures. METHODS Three commonly used arthroscopic knots (surgeon's knot, Seoul Medical Center, and Duncan loop) tied with no. 2 high-strength sutures were compared with a pretied knot secured with either 1, 2, or 3 reversed half hitches (RHAP...
متن کاملThe giant knot: a new one-way self-locking secured arthroscopic slip knot.
A secure slip knot is very important in the field of arthroscopy. The new giant knot, developed by the first author, has the properties of being a one-way self-locking slip knot, which is secured without additional half hitches and can tolerate higher forces to be untied.
متن کاملHow should we define failure after surgical shoulder stabilization?
If 2 alternating half-hitches are required to back up the SPK, it is more time-consuming to tie than the SMC and Revo knots and potentially stacks higher, thus eliminating 2 of its most attractive features. Ultimately, our goal was to test the SPK in a manner that could be safely translated into our clinical practice. In our study we determined that the SPK tied with a single backup half-hitch ...
متن کامل