Investigation of the mechanism of sol-gel formation in the Sr(NO3)2/citric acid/ethylene glycol system by solution state Sr nuclear magnetic resonance spectroscopy
نویسندگان
چکیده
Vishal Agarwal School of Materials Science and Engineering, and Molecular Design Institute, Georgia Institute of Technology, Atlanta, Georgia 30332-0245 Meilin Liu School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0245 William S. Rees, Jr. School of Chemistry and Biochemistry, and School of Materials Science and Engineering, and Molecular Design Institute, Georgia Institute of Technology, Atlanta, Georgia 30332-0400
منابع مشابه
Production of Sr-Ferrite Sub-Micron Powder by Conventional and Sol-Gel Auto-Combustion Methods
Magnetic powder of Sr-ferrite was prepared by conventional and sol-gel auto-combustion methods. In conventional method, strontium carbonate and ferric oxide powders were mixed together and then mixture was calcined. In sol-gel auto-combustion method, a solution containing strontium nitrate, ferric nitrate and citric acid was heated until the combustion took place automatically; then, as-burnt p...
متن کاملPhase Formation, Microstructure and Magnetic Properties of BiFeO3 Synthesized by Sol-Gel Auto Combustion Method Using Different Solvents
In this research nano particles of bismuth ferrite (BiFeO3) were synthesized by sol-gel auto-combustion route. The effect of water and ethylene glycol solvents were studied on phase constituents, magnetic properties and microstructure of the bismuth ferrite by X-ray diffraction (XRD), scanning electron microscope (SEM) and vibration sample magnetometer (VSM) techniques. XRD resul...
متن کاملTHE EFFECT OF CTAB SURFACTANT ADDITION AND ADDITIONAL Sr ON PHASE FORMATION AND MAGNETIC PROPERTIES OF NANOSIZED SrFe12O19 SYNTHESIZED VIA SOL-GEL AUTO- COMBUSTION METHOD
trontium hexaferrite (SrFe 12 O 19 ) nanosized powders were synthesized by sol-gel auto-combustion method with and without cetyltrimethylammonium boromide (CTAB) addition in the sol with Fe/Sr ratio of 11 (using additional Sr). The resultant powders were investigated by X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscope (FESE...
متن کاملCO oxidation on perovskite-type LaCoO3 synthesized using ethylene glycol and citric acid
In order to synthesize perovskite-type LaCoO3 with good surface crystallinity, the gel prepared by adding both ethylene glycol (EG) and citric acid (CA) to the aqueous solution of La(NO3)3·6H2O and Co(NO3)2·6H2O was fired at 600°C in air for 3 hours. The transmission electron microscopy (TEM) observation indicated that the particles of LaCoO3 tended to have a uniform shape at EG/CA = 4. Althoug...
متن کاملSTUDY OF THE OPTIMUM CALCINATION TEMPERATURE FOR THE SYNTHESIS OF STRONTIUM HEXAFERRITE MAGNETIC CERAMIC NANOPOWDER BY A SOL-GEL AUTO-COMBUSTION METHOD IN THE PRESENCE OF CATIONIC SURFACTANT
In this research the sol-gel auto-combustion method was used to prepare strontium hexaferrite nanopowder. A solution of distilled water, ferric and strontium nitrates, citric acid, trimethylamine, and n-decyltrimethylammonium bromide cationic surfactant, was heated to form a viscous gel. The gel was heated and then ignited automatically. As-burnt powder was calcined at temperatures from 700 to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013