Effect of isocyanate content on thermal and mechanical properties of polyurea
نویسندگان
چکیده
Novel polyureas with soft segments based on a difunctional amine, Versalink P-1000, and hard segments based on Isonate 143L, which is a mixture of difunctional and trifunctional isocyanates, were synthesized. The stoichiometric ratio of Isonate 143L to Versalink P-1000 in the polyurea material system was incrementally varied. The properties of the resultant polyurea formulations were characterized using dynamic mechanical analysis (DMA) and modulated differential scanning calorimetry (MDSC). The dynamic mechanical properties measured as storage and loss moduli were significantly altered through the variation of the stoichiometric ratio; however, the glass transition temperatures exhibited in all variations were quite consistent. The experimental results indicate that judicious selection of hard segment content can have a marked effect on the ultimate properties and performance of the polyurea material system. 2013 Elsevier Ltd. All rights reserved.
منابع مشابه
بررسی اثر زنجیرافزاینده 4،4 َ- بیس(فنیل آمین) متان بر خواص مکانیکی و حرارتی شبکه پلیاوره- یورتان بر پایه HTPB
Polyurea-urethanes are one of the polyurethane categories that causes better phase separation due to increasing the hard segment length and non-covalent interactions. In this research, hydroxyl-terminated polybutadiene based polyurea-urethanes have been synthesized via one-pot polymerization of triethanol amine triflouroborate comlex as cross-linker, isophoron diisocyanate as curing agent and v...
متن کاملInvestigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites
Thermoplastic polyurethane (TPU)/clay nanocomposites were prepared via a melt-compounding method using ester type TPU and two different modified organoclays (Cloisite 30B and Cloisite 15A) in different contents. The Effects of the chemical structure and content of the nanoclays on the thermal degradation and mechanical properties of TPU were also investigated. The effect of structural modificat...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملModeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design
Thermoplastic elastomer of PA6/NBR reinforced by various nanoparticles have wide application in many industries. The properties of these materials depend on PA6, NBR, and nanoparticle amount and characteristics. In this study, the simultaneous effect of NBR and graphene nanoparticle content on mechanical, thermal properties, and morphology of PA6/NBR/Graphene nanocomposites investigated by Cent...
متن کاملPolyurea microcapsules in microfluidics: surfactant control of soft membranes.
Interfacial polymerization techniques offer a versatile route for microcapsule synthesis. We designed a microfluidic process to synthesize monodisperse polyurea microcapsules (PUMCs); the microcapsules are formed by an interfacial polymerization of isocyanate dissolved in the oil and an amine dissolved in water. We measure the mechanical properties of the capsule as well as transport properties...
متن کامل