Glow Discharge Plasma Properties of Gases of Environmental Interest
نویسندگان
چکیده
Experiments in a low pressure glow discharge on gases of environmental relevance: CO2,CO y O2 are reported. We studied the various atomic processes: ionization, excitation and molecular dissociation with typical discharge parameters of p∼0.6 mbar, I≤ 0.1 A and V∼1100 Volts. We used visible and near UV spectroscopy to observe the emitted radiation on both electrodes on pure gases and hydrogen seeded mixtures. We also set up Langmuir probes in both electrodes.
منابع مشابه
Double Langmuir probe measurement of plasma parameters in a dc glow discharge
In this paper, plasma main characteristics such as electron mean temperature, electron number density, and oscillation frequency have been measured experimentally using the double Langmuir probe diagnostic system. In our experiment, the plasma was generated by applying the low pressure dc glow discharge in several common gases. The experimental results indicated the highest plasma density and o...
متن کاملDeposition of amorphous silicon alloys
Hydrogenated amorphous silicon alloys of carbon and germanium can be deposited by glow-discharge decomposition of gaseous hydrides or fluorides. Non-plasma methods such as photochemical vapour deposition are also used and offer guidelines for understanding and improving the standard glow-discharge method. These amorphous alloys usually have poorer structural and electronic properties than pure ...
متن کاملنیتروژندهی فولاد در محیط پلاسما و بررسی لایه سخت شده
In this process after making proper chamber to produce plasma in d.c. Glow regime and readiness of samples and doing microhardness and PIXE analyzes, samples nitriding began in different conditions. The hardness changes and the depth of hardened layer of 321, 316 and 304 steels are studied as a function of discharge parameters [8, 9]. The plasma was produced using a mixture of N2 and H2 gases...
متن کاملSurface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
Wetability of biocompatible polymers can be improved by plasma surface modification. The purpose of this study was to surface modify an experimental poly (dimethylsiloxane) rubber (PDMS) material in order to improve its wetability and biocompatibility. Surface properties of the PDMS were characterized using contact angles measurement for wetability analysis. Samples of experimental silico...
متن کاملInfluence of the interelectrode distance on the production of nanoparticles by means of atmospheric pressure inert gas DC glow discharge
This work is aimed at investigating the influence of the inter-electrode spacing on the production rate and size of nanoparticles generated by evaporating a cathode on an atmospheric pressure dc glow discharge. Experiments are conducted in the configuration of two vertically aligned cylindrical electrodes in upward coaxial flow with copper as a consumable cathode and nitrogen as a carrier gas. ...
متن کامل