Effect of Fluidized Bed Stirring on Drying Process of Adhesive Particles

Experimental and Theoretical Investigation of Drying of Green Peas in a Fluidized Bed Dryer of Inert Particles Assisted by Infrared Heat Source

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrar...

Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer

The drying kinetics of hawthorn in a pilot-scale experimental fluidized bed dryer with and without vibration was investigated. The effect of operating parameters, such as vibration intensity, drying air flow rate, and temperature, on the drying rate and shrinkage of hawthorn was studied. The hawthorn fruit was dried at various drying air temperatures ranging from 40-70oC and drying air volume f...

Effect of Process Variables on Growth Kinetics of Lactose Particles in a Wet Spray Fluidized Bed Granulator

Prediction of Minimum Spout Velocity and Moisture Distribution of Ammonium Perchlorate Particles in a Spouted Bed Dryer

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...

Bed Voidage and Heat Transfer in Non-Newtonian Liquid-Solid Fluidized Bed

The presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. Moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. The aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coeff...